Recommended Keyed Alike Coupler Lock  

Mike, since the Fastway Universal Coupler Lock #FA86-0015-316 is universal it will also work with your Demco Hydraulic Brake Actuator #DM72VR.

To secure your PJ Trailer that's equipped with the Demco eZ-Latch Coupler #DM14040-81 I highly recommend the Fastway Universal Trailer Coupler Lock #FA86-0015-318, which doesn't require a lip on the coupler for a proper connection. This is a…

The only difference between the couplers is the key number they come with; otherwise they are exactly the same. - Key 302: Fastway Universal Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers #FA86-0015-302 - Key 316: Fastway Universal…

The Fastway Trailer Coupler Lock #FA86-0015-318 and the other Fastway coupler locks such as #FA86-0015-310 are exactly the same lock. The only difference is that #FA86-0015-318 has key numbers 318, whereas #FA86-0015-310 mentioned above, will only…

The most similar coupler lock we have to the #BLTL-20 that would fit the Demco coupler #DM14976-52 would be the Fastway part #FA86-0015-316 which fits into the coupler and has a bar that runs across the top of it but since it has a little more…

The most popular option we have that has the highest ratings is the Deadbolt hitch part #e98880. It'll span the 2-1/2 inch outside measurement you need. It's double-chrome plated to resist rust and it's also made by Deadbolt right here in…

We've got what you're looking for. The Curt Front Mount Hitch Receiver, part #C31028 mounts to the undersides of the frame members at the front of your Jeep so that the receiver opening is located under the front bumper, as you can see in the…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

First you will need to remove the old hydraulic equipment. Remove the surge coupler or actuator, remove all the lines, and finally remove the brake assemblies. If you have 10 inch diameter hub and drums, you may need to replace those as well. If you…

Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…