Will The Replacement Keypad For MaxxFan Deluxe Work With The MaxxFan Plus?

Question

Question:

Earlier this season, I purchased the Replacement Roof Vent for MaxxFan Plus Roof Vent w/ 12V Fan - Powered Lift - 10 Speed - Smoke # MA99FR Now I am looking to confirm if the MA10-21304K device will integrate to the main unit correctly. It appears there is an 8-pin header on the circuit board of the MA99FR. If the MA10-21304K wont integrate correctly, can you point me to which device will work correctly. Im replacing a simple vent fan in the bathroom that was shattered during a recent tornado storm Thank you in advance for your help!

asked by: Bob H

0

Expert Reply:

Yes, the Replacement Keypad for MaxxFan Deluxe Roof Vent # MA10-21304K will work with your MaxxFan Plus # MA99FR since the MaxxFan # MA00-07500K & # MA00-07000K use the same circuit board # MA10A21275K.

expert reply by: Bryce D

0

Answer 1

Hi Steve; does your wall switch look like the #MA00A03550K? The Replacement MaxxFan Plus 4-Speed Roof Vent #MA00-04751KSX is designed to replace the 00-04751KS which works with this wired wall controller. If you have this switch, or the older model…

view full answer...

Answer 2

The MaxxAir roof vent part #MA00-04751KSX can be used with the Replacement Key Wall Control For MaxxFan Plus and Deluxe #MA00A03550K which is wireless.

view full answer...

Answer 3

Since multiple MaxxAir Fans have the same features that you listed it's honestly best to first determine the exact model number you have before purchasing anything and end up not having it be compatible. I've listed below all the available…

view full answer...

Answer 4

The Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX is meant to be a direct replacement however not all the necessary hardware is included. The remaining items you'll need is the Key Wall Control part #MA00A03550K,…

view full answer...

Answer 5

If your MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX isn't lifting electronically or manually then your lift arm or operator #MA10-20281K-1AF is most likely broken and would need to be replaced. The gear inside these are notorious…

view full answer...

Answer 6

Hey Jay! The MaxxFan Plus 4-Speed Roof Vent #MA00-04751KSX does not come with a wall controller but it is compatible with one. You will have to pick up the Replacement Key Wall Control For MaxxFan Plus and Deluxe #MA00A03550K separately.

view full answer...

Answer 7

Hi Shawn! You're dealing with a common issue when installing a MaxxAir II cover #MA76JR on a MaxxFan 4751KS, like the #MA00-04751KSX. Here’s the situation you're running into: -First, the MaxxFan lid opens almost vertical when fully opened…

view full answer...

Answer 8

Hey Devon, does your RV roof vent wall control unit look like the #MA59FR? If so you have a MaxxFan Plus RV roof vent that was designed for wall control and for a replacement unit you would want the part #MA00-04500K to use a setup that would use…

view full answer...

Answer 9

The Replacement Handheld Remote for Maxxair Roof Vent Intake/Exhaust Fans - Qty 1 #MA00A01150K is what you need for compatibility with your 5100K model. This will allow you to control the vent from the front seat. This is a remote control and we do…

view full answer...

Answer 10

Your MaxxFan Plus Roof Vent #MA00-04500K uses the Remote #MA00A01150K. The Key Wall Control #MA00A03550K is not compatible with your fan.

view full answer...

Answer 11

Sounds like the remote is down for the count and needs to be replaced. If you have the MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke #MA00-07500K you will need the Replacement Handheld Remote for…

view full answer...

Answer 12

Unfortunately, the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan #MA10A21275K you ordered would not be the correct circuit board. The correct circuit board is the Replacement Printed Circuit Board for…

view full answer...