Recommended Replacement Magnetek Model 6712

Question

Question:

Replacement power converter for a magnetek series 6700 model 6712

asked by: Rick

0

Expert Reply:

I recommend the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger, # PD4045KA. This is a great replacement/upgrade at a great price point. It has 7 AC branch circuits rated at 30 amps with two each DC distribution fuses of 20 amp and 30 amp. The converter out put is 45 amps and works with lithium-ion, flooded lead acid, AGM, and gel batteries.

expert reply by: Michael R

0

Answer 1

I would be happy to help! The correct replacement converter for our 6300A model 6332 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 35 Amp #PD4635V which will be a direct replacement. This converter has a built in…

view full answer...

Answer 2

Thanks for the picture! If you can't get your races out, you'll just need the entire new hub assembly #AKIHUB-545-2-EZ-2K which comes with brand new races already installed, new bearings, and new grease seals but you'll need to use #34823…

view full answer...

Answer 3

For your Dico Hub 45263, you are going to want to use part #L44649 for both the inner/outer bearings and part #168255TB for the grease seal which has a double lip. I was not able to confirm that the hub uses different inner and outer bearings.…

view full answer...

Answer 4

You are going to need to track down a dial caliper or micrometer. I did some online research and wasn't able to find any results for a Dico 45263 hub, but I might be able to get you an equivalent. I'll need some more information to find you a…

view full answer...

Answer 5

Hey Mike, there isn't a way to get just the pump of the assembly you are in need of so the only solution would be the part #LC251910 that you referenced.

view full answer...

Answer 6

It appears you have tandem axles with a combined weight capacity of 7k on your 2019 Vanleigh Vilano. So, If you have square axles then you need Axle Riser Kit #LC382741, which will lift your trailer 3 1/2". The Torflex Lift Kit #K71-725-02 you…

view full answer...

Answer 7

I talked to my tech contact at Progressive Dynamics. They tell me due to the design of the model 555 it is easier and more productive to do a complete swap and replace it with the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart…

view full answer...

Answer 8

With the Magnetek 6700 series power centers being obsolete your best option is to replace it with one like the Progressive Dynamics 4100 Series RV Converter #PD4135K.

view full answer...

Answer 9

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Recommended Replacement Magnetek Model 6712

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching