What are Common Trailer Wheelbases
Updated 12/22/2025 | Published 10/03/2024 >
Question:
Hi there, very curious on what determines the distance you use between axles. Should they be as close as possible to increase turn radius? are there other factors that I am not aware of? Please get back to me, thank you so much.
asked by: Caleb H
0
Expert Reply:
Hey Caleb, so generally what you see is that on lower capacity trailers the wheelbase between the axles is 33 inches and above like 6k or so the wheelbase most commonly seen is 35 inches. This just works out the easiest and corresponds with how most modern trailer suspension is setup.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 5-5/8 Inch Long
- Tandem Axle
- Dexter
more information >
Continue Researching
- Search Results: trailer leaf springs
- Search Results: leaf spring bushing
- Search Results: weight distribution hitch
- Search Results: sre4000
- Search Results: moryde suspension
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Search Results: morryde trailer suspension parts
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Shop: 4-Leaf Double-Eye Spring for 5,200-lb Trailer Axles - 25-1/4" Long
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: Trailer Hitch
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 Bolt Pattern - 89" Long - 6,000 lbs
- Search Results: trailer suspension parts
- Video: Setting Up Your MORryde Suspension Upgrade Kit - 2022 Grand Design Imagine XLS Travel Trailer
- Q&A: What Tire Size Can You Replace a 205/75 R-14 Tire With
- Q&A: Comparing Load Range C And D Tires For A 2012 Lance 2185 Travel Trailer
- Q&A: Where Are Kenda Tires Manufactured
- Video: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers Review
- Video: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
- Video: What to Know About the 6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles
- Video: MORryde Standard Frame Hanger X-Factor Crossmember Installation - 2022 Grand Design Imagine Travel T
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
- Q&A: Determining Hanger Spacing for Replacement Leaf Springs on Trailer
- Q&A: Determining the Correct Leaf Spring Length for Trailer
- Q&A: Where Does the Clip on Leaf Spring Need to be Facing When for Installation
- Q&A: Do Trailer Leaf Springs Have to Face a Certain Direction


Jameson C.
12/22/2025
Hey Caleb, how did things go with setting the axle spacing on your trailer? It’d be great to hear if the 35-inch setup worked well with your suspension. Your update could make it easier for the next person working on a similar build.