Will Replacement M8 T-Bolts Fit Rhino Rack Aero Vortex Crossbars Top Channels

Question

Question:

Will these T bolts fit the upper T slot on the Rhino Rack Vortex Crossbars?

asked by: Theron

1

Helpful Expert Reply:

Yes, the Replacement M8 x 16.5 mm Stainless Steel Rectangular T-Bolts # RR72XB that you referenced do fit the top channels of the Rhino Rack Vortex crossbars.

expert reply by: Jameson C

1

Answer 1

I went ahead and contacted Rhino-Rack, and they said that the aero bar accessory bar and the HD accessory bars for the pioneer platform are essentially the same. However, Rhino-Rack did say that they always recommend the aero bar accessory bar over…

view full answer...

Answer 2

The Universal Awning Fit Kit for Rhino-Rack Vortex Aero #RR31111 will attach to the Rhino-Rack Vortex Aero Crossbars #RRVA137B-2. The brackets will mount on the bars and provide you an L shaped bracket for mounting an awning. The LED Light Mounting…

view full answer...

Answer 3

The Rhino Rack Vortex Aero Crossbars like the part #RRVA150B-2 has pretty standard T-slot dimensions that you can see in the attached picture. Basically the top opening is 7/16 inch and in the slot itself measures 7/8 inch. Essentially all roof rack…

view full answer...

Answer 4

Hi Brian; the channel is 7/8" wide x 1/4" tall and the opening at the top is 7/16" wide. I went ahead and attached a diagram below with the measurements. The spacers #RRQMVA25 to clear the handle are the only other thing you will need…

view full answer...

Answer 5

We have exactly what you are looking for. The Truck Rack Crossbar T-Slot Fit Kit #MPG8287 is an exact fit for the top channel in the Rhino-Rack Vortex Aero Crossbars such as the #RRVA137B-2. This will give you four channel nuts which should be…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Will Replacement M8 T-Bolts Fit Rhino Rack Aero Vortex Crossbars Top Channels

Product Page this Question was Asked From

Continue Researching