Why Are My Calipers Dragging On My Load Rite Trailer?
Updated 06/08/2022 | Published 06/06/2022
Question:
I have a 23 boat on a 1 year old Load Rite trailer with surge disk brakes. One of the calipers keeps dragging. I can take it apart and compress it with a C clamp and it will make it to the Marina and back one time before it drags again and causing the hub to get scorching hot. What would cause this?
asked by: Rob B
Expert Reply:
If your brake calipers are dragging, this is indicating that your caliper is not properly aligned with the rotor. This is caused by a bent caliper mounting bracket, or some warped rotors and pads.
To fix this, you'll need to inspect the alignment between the rotor and the pad, and if it turns out to be a bent bracket simply replace as necessary.
If you're able to send me the specific brake kit you have or some pictures of your brakes, I would be happy to see if we have some replacement parts for you.
I have also attached a link to all of our brake calipers as well.
Product Page this Question was Asked From
Replacement Shock Absorber for Dexter Model 60 Brake Actuators
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Shocks
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Inner Member for Dexter DX7.5L Actuator - Single Axle w/ Disc - 2" Ball - 7,500 lbs
- Shop: Dexter DX7.5L A-60L Surge Brake Actuator w Electric Lockout - Disc - 2" Ball - Primed - 7.5K
- Q&A: How the Shock Absorber Works on a Surge Brake Actuator
- Article: How to Bleed Your Trailer Surge Brakes
- Search Results: boat trailer brake actuator
- Search Results: 34043
- Shop: Replacement Shock Absorber for Dexter Model 60 Brake Actuators
- Shop: Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Weld On - Disc - 2" Ball - 7.5K
- Shop: Replacement Master Cylinder Assembly for Dexter Brake Actuators - Disc Brakes
- Shop: Replacement Shock for Demco Hydraulic Trailer Brake Actuators - Models DA10, DA16, DA20, and DA91
- Q&A: How to Replace the Shock on a Titan Model 10 Surge Brake Actuator
- Q&A: Torque Settings For Wheel Lug Nuts For Boat Trailer And utility Trailer
- Q&A: Picking Out Replacement Actuator Shock for Gabriel MPD 85746
- Q&A: How to Bleed Trailer Surge Brakes
- Q&A: How to bleed the brakes on a surge brake actuator on boat trailer
- Q&A: Troubleshooting Surge Brake Actuator that Won't Release Brakes
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Video: Let’s Check Out the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout
- Search Results: trailer jack
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
- Video: Detailed Breakdown of the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout
- Article: Trailer Lighting Requirements
- Search Results: trailer brakes
on Accessories and Parts
