Replacement Hardware Kit for Curt Trailer Hitch C13201

Question

Question:

I am trying to purchase only the mounting Hardware for Trailer hitch part# C13201 2010 Dodge Journey

asked by: Ivan C

0

Expert Reply:

We do sell replacement hardware for all of the trailer hitches we offer including the Curt # C13201 with the part # RHK.

expert reply by: Jameson C

0

Answer 1

The U-bolt replacement you are in need of is the part #TH02943 for your Sears X-Cargo box.

view full answer...

Answer 2

Welcome back Walter and congrats on the new Jeep and RV! To flat tow your 2026 Jeep Gladiator Willys, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plate item #e84ZR…

view full answer...

Answer 3

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 4

Hey, Jonah! Yes, we do carry the hardware you need for your 2010 Dodge Journey. You’ll want to order part #RHK. When you go to the RHK product page, you’ll see a box where you can enter your hitch’s part number. Just enter the part number of the…

view full answer...

Answer 5

The easiest way to determine if you have LED or incandescent lights on your Dodge Journey is to simply watch them illuminate and turn off. If they come on immediately and turn off immediately then they are most likely LEDs. LEDs will also be quite a…

view full answer...

Answer 6

Hey Mark, what you need is a taillight converter like the part #HM48847 which is designed to take your separate taillight circuits and combine them like what trailer wire circuits are designed for.

view full answer...

Answer 7

Hey Steve, thanks for the pictures. That's normal. The Dexter vault hubs popping out slightly like that shows the system is pressurized. It'll pop out all the way if there's a leak or a problem. I would check the other one though. It…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Replacement Hardware Kit for Curt Trailer Hitch C13201

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching