Replacement Fish Wire Bolt Leader For Curt Trailer Hitch

Question

Question:

I need the fishwire Hardware that comes with the Curt package 13264. Part#1-2x30 Fishwire. How or where can I get it?

asked by: Don N

0

Expert Reply:

The Curt Fish Wire Bolt Leader - 1/2 inch # C58400 is the correct fish wire needed to help install the Curt Hitch # C13264 on your 2022 Toyota Tacoma.

I attached a review video link below.

expert reply by: Noah E

0

Answer 1

The main difference between the Curt #C13264 and the etrailer #e98905 hitch receivers lies in the matte black powder coat finish of the etrailer hitch versus the traditional glossy finish of the Curt hitch. I recommend the #e98905 because the matte…

view full answer...

Answer 2

There are two differences between the Curt #C13264 and the etrailer #e98905 Class III hitch for the 2022 Toyota Tacoma. • The manufacturer's sticker • The powder coat finish applied to the hitch Curt manufactures the etrailer hitches for us. The…

view full answer...

Answer 3

While I do very, very strongly recommend getting a new hitch in case there was any damage in the accident that may have compromised it structurally, there is replacement hardware available for your Curt Trailer Hitch Receiver #C13264. What you will…

view full answer...

Answer 4

We can get you what you need. For a trailer hitch for the 2023 Toyota Tacoma SR5 my recommendation is the etrailer Class 3 Hitch #e98905. This is your standard 2" receiver and it has a 6,000 lb GTW and 900 lb TW weight rating. I really like the…

view full answer...

Answer 5

Hey Dominic, thanks for the information! I checked with TorkLift and they do not make a hitch for the 2016 Toyota Tacoma. I recommend our etrailer Trailer Hitch item #e98905. This is a custom fit class III hitch with a 2" receiver that bolts to…

view full answer...

Answer 6

Hey Steve, unfortunately it's not an uncommon problem for the hitch to get slightly bent in shipping which creates the issue you described with the bolt holes not lining up properly. Hitches are heavy and hard to ship/package so unfortunately…

view full answer...

Answer 7

Of the available hitches for your 2017 Toyota Tacoma, my choice would be between the etrailer brand #e98905 or the Curt #C13264 Class III hitch. The frame mounting flanges for both hitches extend inboard versus to the outboard which means the hitch…

view full answer...

Answer 8

The etrailer hitch part #e98905 that you referenced fits all models of the 2018 Toyota Tacoma including the 4 cylinder models so it would work great for you.

view full answer...

Answer 9

The best hitch for a 2023 Toyota Tacoma is going to be the etrailer item #e98905. This hitch is custom fit and bolts to your Tacoma with included hardware. This is a class III hitch with a 2" receiver. It has a 6,000 lbs towing capacity and a…

view full answer...

Answer 10

Yes, the etrailer Trailer Hitch Receiver #e98905 uses 1/2-13 x 1 3/4 carriage bolts to fit the existing holes in the bumper beam on your 2022 Toyota Tacoma. I've attached a link to the instructions as well as a clip from the instructions to…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Replacement Fish Wire Bolt Leader For Curt Trailer Hitch

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching