etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
This item does not fit your vehicle
2019 Ford F-150
These items fit your vehicle
2019 Ford F-150
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
Specs:
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
Good deal for the price. The carriage bolts take a little patience. Drop the spare tire to make the install easier. Four stars instead of five because the dimensions seem just a bit off for the frame rail attachments. There was more of a gap between the receiver and each of the frame rails than I expected and felt almost like I was forcing too much to get the receiver flush on both sides, but at recommended torque it did close the gap. I couldn’t get my torque wrench on two of the frame rail bolts due to lack of space, so a box wrench and elbow grease required.
Didn't try to install it myself so I took it to Lindustries in Ridgecrest. Just too heavy and I don't have a lift, or anyone to help. It would have been dangerous without proper equipment and help. They had it done in less than a hour. Checked to see if my bike rack fit in the receiver and no problem! I just wish I had not procrastinated so long in getting this done.
Easy installation using provided extra' s.
I purchased this product a year ago to put on my 2019 Toyota Tacoma and it was a really easy install. I also love the black color is not painted on, so it hasn't scratched or anything throughout the year and it has definitely been put to use. I recommend this hitch receiver if you're looking for one and on the fence, you won't find a better value for the price.
Great product good instructions
Installation was a piece of cake. Looks beefy. I'll have to let you know later about long term durability.
My 2nd Etrailer hitch. Perfect fit for my ‘21 Tacoma. Exceptional quality for the cost. As I have come to expect from Etrailer, the written and video directions were perfect. I will continue to order and recommend Etrailer products!
The first step is the hardest, but once you know the trick, even that is easy. With the bolt and the spacer inside the bumper and attached to the fish tape, run your finger through the hole in bottom to hold the spacer perpendicular to the bottom of the bumper. Use your finger on the opposite hand to direct the bolt through the hole. Then, pull the fish tape and the bolt will fall right into place. The rest of the install is easy.
the product was delivered at my front door very quickly , and the install was extremely easy and fast Thanks to the design and available video tutorial made by etrailer.com .
Beyond the obvious screw fishing step (which honestly wasn't that bad), installing the hitch receiver was a breeze! Definitely needed two people. Definitely would recommend
Fits my 2022 3rd gen tacoma like a glove. The matte black has a clean, factory look. Install is straight forward; I used a floor jack to hold it in place.
Unfortunately I had to return the hitch receiver. I made numerous attempts to drop the bolts through the holes in the support channel so that the receiver could be attached. The provided bolts were simply too long. This made it impossible to get the bolts upright enough do drop through the holes. I really liked the look of the hitch receiver. It appears to be built very solid. Very disappointed.
Beautiful welds! All parts are ready for installation. I'll know more after it is bolted in.
Me and my son installed this hitch in 15 min super easy
I was impressed with how durable the hitch is! Shipping was quick also.
YOU GUYS ARE THE BOMB !! ALWAYS HAVE WHAT WE NEED IN STOCK. FAST SHIPPING. THANK YOU FOR ALWAYS BEING THERE WHEN WE NEED TRAILERING SUPPLIES !!!
The receiver fit perfectly with a couple loves taps from a mallet! Instructions say 40 for DIY. It’s more like 40 minutes just use the fishing wire haha. But over all I’m extremely satisfied
Just right.
Works perfectly. So I really appreciate their help in getting the right hitch.
Great unit. Easy enough install. Great instructions. Built well. No complaints at all.
Included everything needed for an easy installation.
The rear hitch mounts are slightly wider and required considerable effort to get it in place. Also, two of the four rear mounting bolts are only accessible using a 19mm wrench but that isn’t mentioned in the directions and cannot be properly torqued using a ratchet style torque wrench. The build quality is excellent and heavy duty.
I was really disappointed that I couldn't finish the install on my own (it isn't brain surgery!) but there was a screw coming in from above on the bumper so I couldn't pull the last two bolts through. Qnd taking the moulding and whatever off looked complicated. To have someone do it took an hour and a half and $240.
Fast shipping.
Great instructions.
Perfect fit.
Made in USA.
Easily went together even while being caught in a rainstorm! As stated fishing the two bolts and spacers through rear tube took the longest. Also dropping the spare gives MUCH better access to the four frame bolts and room to torque. That should be mentioned in your videos. Over all smooth fit and function. Have to wait for rain free day for wiring install.
Super easy to install. It shipped to me the next day.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
6/12/2025
Wow that's great, Robert! So glad we could be part of a good experience :) Any camper trips coming up?