Hardware Kit for Westin HDX Grille Guard to Fit 2017 Ford F-250 Super Duty

Question

Question:

Do you sell a hardware replacement kit for the Westin hdx grill gaurd to fit a 2017 f250 I can’t seem to find it here thanks

asked by: Dustin

0

Expert Reply:

Since the Westin HDX grille guard part number that fits your 2017 Ford F-250 is the part # 57-3905 the correct hardware kit you'd need is the # 57-3905PK.

expert reply by: Jameson C

0

Answer 1

The Replacement Hardware Kit for Westin HDX Grille Guard #57-3900PK is the correct kit for your Westin HDX Grill Guard on your 2019 Ford F-250 Super Duty. It includes all the hardware and mounting brackets necessary for installation. If you have any…

view full answer...

Answer 2

We do have the correct mounting brackets for the Westin HDX Grille Guard #57-3900 or #57-3905 that fit your 2021 Ford F-250. The correct mounting hardware is the following: - Replacement Hardware Kit for Westin HDX Grille Guard #57-3900PK

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hey Steve, welcome back! The difference between these two Hellwig Adjustable Big Wig Rear Anti-Sway Bars is the fitment. The #HE94FR is designed for 4WD models and the #HE97MR is designed for 2WD models. Since your 2019 F-250 is 4WD you need the…

view full answer...

Answer 8

Hi Frank; the #RP74FR (68204) and #SWW-06 look different because they are a little different. The #RP74FR is only designed to work with the 68220 and 69220. If you have a different Sidewinder this wedge will not fit. It also fits a wider range of 5th…

view full answer...

Answer 9

Hey Trevor, nice truck and trailer! For your 2024 Ford SuperDuty truck, you can definitely go with either option: - SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-127-47 (1,500lb capacity) - SumoSprings Solo Custom Helper Springs - Rear Axle…

view full answer...

Answer 10

Hello Jeffry, Great question. The OEM prep package (Original Equipment Manufacturer prep package) is a super handy factory option that makes towing with your truck a whole lot easier, especially if you're planning to use a 5th-wheel or gooseneck…

view full answer...

Answer 11

Hey Eric! For air bags I recommend going with Firestone. They make the most durable and reliable air bags for your 2024 F-250. If you don't mind using your phone to control the air compressor you can use the Firestone Ride-Rite Air Bags w/ Easy…

view full answer...

Answer 12

Hey Brady, Brophy in the past has told us that the tie downs part #HSWB don't have a weight capacity but you would want to make sure you use them only with campers that were designed to fit the bed length of the truck. The turnbuckles part #TDHP…

view full answer...

Hardware Kit for Westin HDX Grille Guard to Fit 2017 Ford F-250 Super Duty

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching