Parts Needed To Mount A B&W Patriot 5th Wheel Hitch In The Bed Of A 2019 Ford F-250

Question

Question:

My son bought this hitch for his 2019 Ford F-250 Superduty 6.7l I dont believe it has factory prep package, no pucks without doing any research and am wanting to find out whats needed for install. Or if a different hitch is recommended since he also has a big Rigid Joboxinch in the bed. Thank you in advance, Steve

asked by: Steve A

0

B&W Patriot
(click to enlarge)

2019 Ford F-250
(click to enlarge)

Expert Reply:

Hey Steve,

The B&W Patriot # BWRVK3255 you have would require base rails or a gooseneck hitch and an adapter in order to mount to the bed of the F-250. If you want to go with base rails then I recommend the B&W Custom Installation Kit w/ Base Rails # BWRVK2402. This comes with custom brackets to match up to the factory holes in your frame to make the installation drastically easier. The Patriot # BWRVK3255 will slot right into the rails and be ready to tow.

If you think you'll also haul a gooseneck trailer at some point and want the versatility you can install a gooseneck hitch like the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1116 and then use an adapter # 16310 to mount your Patriot.

For your specific model there is also the option to install the Reese Under-Bed Gooseneck Trailer Hitch # RP39FR, which would give you a gooseneck hitch and puck system. To connect your Patriot you would just need the Curt # C88KR rail adapter.

Out of the three options I would go with the Reese # RP39FR for the clear bed and versatility to connect to multiple trailers/hitches. Each of these options are going to mount over the rear axle so there is the chance that the job box could interfere with the hitch when mounted since this isn't an 8' bed.

Let me know what you think and we can keep discussing options if these just don't match what you're wanting.

expert reply by: Kevin C

0

Steve A.

1/13/2025

What's the difference between the BWRVK2402 and BWRVK2406?

Reply

Kevin C.

1/14/2025

@SteveA The # BWRVK2402 was replaced by part number BWRVK2406 by the manufacturer. Manufacturers replace part numbers all the time when they make slight changes or to simplify their sku's. There's no difference here in this case, we just have the older part number listed for the same kit.

Reply

Answer 1

Hey Thomas, congrats on your new trailer. You might have to play around with the different positioning of the pivot arms once you get the trailer home. There's no of knowing exactly what position you'll need without knowing the pin box…

view full answer...

Answer 2

The only way to haul a 5th wheel trailer with the gooseneck hitch on your 1996 Dodge Ram would be to install a Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter. None of our 5th wheel to gooseneck adapters like the Convert-A-Ball…

view full answer...

Answer 3

Hey Doug, For the 2024 Ford F-350 bed you would need the Curt Custom Fifth Wheel Installation Kit for Ford #C39VV. This would be both the under bed mounting brackets and above bed base rails as well as all necessary hardware. This base rail kit fits…

view full answer...

Answer 4

Hey Daniel, so while we don't have any isolators we can sell with the B and W rail kit part #BWRVK2402 I can still help. When we install kits like this on aluminum bed trucks we use landscaping plastic between the bed and the rails to provide…

view full answer...

Answer 5

The B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt #BWRVR3200 will fit your 2018 Ford F-250 with aluminum bed but B&W doesn't recommend it. You will want to use some sort of spacers/isolators that…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

Since your dealer said your 2017 Ford F-250 short bed with a 6.7L diesel and 3.55 axle ratio can tow 16,500 lbs, you can tow a 5th wheel trailer that weighs a total of about 14,000 lbs without issue. You mentioned pin weight, and for a 5th wheel…

view full answer...

Answer 8

For your Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter - Lippert 1621 and 0719 - 20,000 lbs #RP94720 you will need the Air System Service Kit for Reese Goose Box 5th Wheel to Gooseneck Air Ride Coupler Adapter #RP86007 which will…

view full answer...

Answer 9

In order to plug a 50 amp camper into a 30 amp hookup at a campsite you will indeed need an adapter, for which the Mighty Cord #A10-3050FHVP will work perfectly. With this particular setup you would still want to use a 50 amp surge protector like…

view full answer...

Answer 10

Hey welcome back, Jody. So your best option here will be to get a new 50 amp surge protector for your new travel trailer. If you did end up at a camp ground with 50 amp service you would want to have it. I know a lot of sites do have just 30 amp but…

view full answer...

Answer 11

Thank you very much for your purchase from etrailer of the Rear View Safety Switcher Box #RVS-501N. I reached out to the manufacturer who said to me that the issue is that you're not receiving enough voltage, and that you will need to utilize…

view full answer...

Answer 12

We can get your 2019 Ram 2500 short bed with RamBoxes set up with a 5th wheel hitch, and you'll need a fixed hitch instead of a slider because your 5th wheel trailer will require a Sidewinder rotating pin box. A Sidewinder moves the pivot point…

view full answer...

Parts Needed To Mount A B&W Patriot 5th Wheel Hitch In The Bed Of A 2019 Ford F-250

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching