Replacement Multiplexer For Rear View Systems Universal Backup Camera Model RVS-770619N

Question

Question:

Can this Rear View Safety Multiplexer Box - 3 Channel # RVS-501N to be replaced my old multiplexer for Model RVS-770619N which is not working?

asked by: FRANK

0

Expert Reply:

Yes, you can use the Rear View Safety Multiplexer Box - 3 Channel, part # RVS-501N, to replace the multiplexer in your Rear View Safety Universal Backup Camera System, part # RVS-770619N.

I have included a video demo link below.

expert reply by: Mark Smith

0

Answer 1

Yes; what you're describing does sound like the issue most likely stems from the multiplexer potentially shorting out. It looks like you've got a Rear View Safety system and will need the Rear View Safety Multiplexer Box - 3 Channel #RVS-501N…

view full answer...

Answer 2

The Rear View Safety Multiplexer Box #RVS-501N has 6 pins on the power in plug but nowhere else. The camera plugs are all 5 pin. The monitor cable only works if you have a Rear View Safety monitor. If you have a different system you need #RVS-501N-3…

view full answer...

Answer 3

You can use the #RVS-501N as long as the rest of your system is a Rear View Safety system. The #RVS-501N-3 is required if you don't have an RVS system.

view full answer...

Answer 4

The Rear View Safety Switcher part #RVS-501N is for connecting to any standard cameras that use RCA connections whereas the part #RVS-501N-3 is for connecting to RVS brand cameras.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Replacement Multiplexer For Rear View Systems Universal Backup Camera Model RVS-770619N

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching