Which Tonno Pro Cover Works With TruXedo Elevate Truck Bed Rack on a 2022 GMC Canyon 5 Foot Bed

Question

Question:

Jon G thanks for the information you sent over I have a Tono pro cover do you know if it will work with the TX86NV ladder rack on my 2022 GMC Canyon short bed. Do I need a t track Thanks

asked by: BIll C

0

Expert Reply:

You're welcome!

It looks like there is a Tri-Fold option, a Hard Fold option, and a Lo-Roll option when it comes to Tonno Pro tonneau covers for your 2022 GMC Canyon with the 5' bed. If you have the Lo-Roll you can use the TruXedo Elevate Truck Bed Rack System # TX86NV since it uses the same clamping system and it installs more inside the bed sides.

The Tri-Fold and Hard Fold both take up all of the space (or almost all of the space) on top of your bed sides so there won't be enough room for any ladder rack. If you have one of these covers then you either need a roof rack or you need a different tonneau cover that is compatible with a ladder rack. If this is the case just let me know which direction you'd like to go and I'll be more than happy to make a recommendation for you!

expert reply by: Jon G

0

Answer 1

Hey Nathan, Unfortunately there is not a standard size tire that comes on those trailers so I do not have a way of knowing exactly what size is on yours. You would need to measure the pilot diameter of the original wheels or the spindle on the axle…

view full answer...

Answer 2

The three radial special trailer (ST) tires we offer in size 215/75-14 can be seen on the linked page. These include the Taskmaster #TTWTRTM2157514D in Load range D, the Provider #TTWTR21514 in Load Range C and the Kenda Karrier #AM10229 also in Load…

view full answer...

Answer 3

Yes, everyone of the 12 inch diameter trailer wheels we offer that have a 5 on 4-1/2 inch bolt pattern like the part #AM20153 that you referenced have a pilot diameter of 3.19 inches. I attached a link to a page that has all of the rims you are…

view full answer...

Answer 4

A 4.80-12 trailer tire and wheel such as the Kenda #AM30630, when inflated will measure 20.7 inches in diameter and have a width of 4.9 inches. A 175/80-13 trailer tire and wheel will measure 24 inches in diameter and have a width of 6.6 inches so…

view full answer...

Answer 5

Thanks for reaching out, Alex! The Yakima OutPost HD Overland Truck Bed Rack #Y01152-58 will be too short to fit the MOLLE Panel #Y98DJ, but you can use the SideBar Rails, Short Bed #Y01153 or Long Bed #Y01154, if you'd like to add some cargo…

view full answer...

Answer 6

You do indeed have a 12 inch rim. When you measure the diameter of the wheel, you'll need to measure the diameter of he wheel where the tire bead meets the wheel. I've provided you a cutaway diagram of a wheel showing where the measurement…

view full answer...

Answer 7

It depends on how much clearance you currently have around your wheels. Ideally, you should have 3 inches minimum clearance between your fender and your wheels and an inch minimum between your sidewall and trailer frame/wall. As your wheel size…

view full answer...

Answer 8

The 4.80-12 Bias Trailer Tire #AM30670 has a diameter of 20.7" and a width of 4.9". As long as you have a 5 on 4-1/2" bolt pattern you can look at the Castle Rock ST205/75R14 Radial Tire w/ 14" Liger Aluminum Wheel #CR39ZR if you…

view full answer...

Answer 9

Based on my research the 5x8 mesh floor trailers from Lowes come equipped with 4.80-12 size tires, which you can verify by checking the sidewall on the tire itself. For the next size up that will provide a larger profile and a higher weight capacity,…

view full answer...

Answer 10

The best thing you can do is switch to a Radial Tire #TT48012C if you do not already have them on your trailer. The radial construction is superior to the bias construction on roadways. The radial tires do not heat up as much as bias tires which…

view full answer...

Answer 11

Narrower tires and rims will certainly help you pick up some side clearance for fitting your boat trailer into your garage. A wheel with positive offset will also help by shifting the wheel's center closer to the trailer frame. Since you have…

view full answer...

Answer 12

If you want to go to the next size up from a 5.30-12 tire you will need to look at 13 inch wheels and tires ST175/80-13. For a wheel and tire combo with 5 on 4-1/2 bolt pattern and radial tire use #AM31985. This tire will be 7 inches wide and 24.1…

view full answer...

Which Tonno Pro Cover Works With TruXedo Elevate Truck Bed Rack on a 2022 GMC Canyon 5 Foot Bed

Continue Researching