Will Timbren Axle-Less System Fit Harbor Freight Trailer with L-Shaped Frame
Updated 05/16/2022 | Published 05/13/2022
Products Featured in This Question
Question:
I would like to upgrade my trailer for more ground clearance. I would like recommendations for this axle-less suspension the hubs and the wheels/tires. I am also questioning the ability of the harbor freight L-channel frame to accept this Timbren system - if the square tubing between the two assemblies LandR would be sufficient or if additional reinforcement would be needed before mounting.
asked by: Craig
Expert Reply:
The Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle w/Flange # ASR1THDS03 can be installed on an L-Shaped trailer frame like what you have on your Harbor Freight trailer. If the upright on the frame is towards the outside of the trailer then you can install this system directly otherwise you'll need to fill in that space with something like a 2x4 so the Timbren bracket has something to sit against. I confirmed this with my contact at Timbren.
For an idler hub you can use part # AKIHUB-545-35-EZ-K but if you're needing/wanting to install brakes on your trailer you'll need the hub and drum # AKHD-545-35-EZ-K as well as the brake kit # AKEBRK-35-SA.
When it comes to wheels/tires you need wheels with a 5 on 4-1/2" bolt pattern and then a tire that matches the same size you currently have. I've attached a link to our selection of tires/wheels that use the 5 on 4-1/2" bolt pattern for you to filter through but if you let me know what the tire size is (found on the tire sidewall) I'd be more than happy to make a recommendation for you on that as well.
Attached are some videos for you to check out.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2.2K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- No Hubs
- 2200 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Shop: Westlake ST205/75R15 Trailer Tire with Glossy Black Eagle Aluminum Wheel - 5 on 4-1/2
- Q&A: Recommended Replacement Axle for Harbor Freight Folding Trailer 62671
- Q&A: Can Timbren Heavy-Duty Axle-Less Trailer Suspension Install on Harbor Freight Trailer
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Q&A: Experiencing Rough Ride with 2,200 lb Timbren Axle-Less Suspension Installed on 1,300 lb Tear Drop
- Q&A: Recommended Timbren Axle-Less System with 5 on 5 Bolt Pattern Hubs for Overland Trailer
- Q&A: Replacement Foot Plate for a Lippert Jack 359278
- Q&A: Timbren Axle-Less Trailer Suspension Compatibility with Jeep 5 on 5 Bolt Pattern
- Q&A: Jeep Wheel Compatibility with Timbren Axle-Less Trailer Suspension System
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Where to Position the Trailer Axle?
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Maintenance Schedule
- Article: How (and Where) to Connect an RV Propane Grill