Recommended SumoSprings For 2004 GMC Sierra 2500 HD Towing Travel Trailer

Question

Question:

I have a 2004 GMC Sierra 2500HD Duramax and tow a 27 foot travel trailer that weights 7500lbs GVWR and 615 hitch weight. I get a little sag on rear which gives a bit of front end lift and headlights need to be adjusted when towing. Do you recommend the Blue or Black sumo spring? I dont want a stiff ride when I am not towing.

asked by: Jerry J

0

Expert Reply:

For your 2004 GMC Sierra 2500 HD towing a travel trailer, the best option for SumoSprings to help with the sag you are getting are the black version, which is the following part number:

- SumoSprings Solo Custom Helper Springs # SSR-211-47

The black # SSR-211-47 have a 1,500 lb capacity (at 50 percent compression), which means when you are towing, they won't be as compressed as the lighter-duty springs, allowing more forgiveness in your ride and better overall stability.

The unloaded ride of your Sierra won't be affected either, as you won't feel it, with the exception of going over something like a speed bump, for example, which would cause a lot of suspension travel. But with normal, everyday driving your truck will have the same ride.

expert reply by: Kyle S

0

Answer 1

I'm happy to help you with that application. For your 2000 GMC Sierra 2500 4WD there are three SumoSpring options for your truck. If you will be doing normal towing and payloads then I recommend the SumoSprings Solo Custom Helper Springs…

view full answer...

Answer 2

The best SumoSprings for your 2018 Chevy 2500 are going to be the SumoSprings Rebel Custom Helper Springs item #SSR-203-47-2. These have a 5,000 lbs load leveling capacity and are compatible with in-bed hitches. This is a two piece system so when…

view full answer...

Answer 3

For your set up I recommend going with the SumoSprings Rebel Custom Helper Springs item #SSR-203-47-2. I never recommend Timbren's unless they are being used on a work body truck because they will significantly affect the ride quality of your…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Ross, the B and W Turnoverball #BWGNRK1067 wasn't designed to fit under a flat bed so there isn't an alternate set of measurements I can recommend. Are you sure it would clear under the flat bed? Normally we have to recommend the…

view full answer...

Answer 12

Hey Justin, the cab style actually doesn't factor with hitches like the Curt part #13322 so yes it will fit all cab styles of the 2012 Chevy Silverado 1500. This is full list of trucks this hitch fits: 1999 - 2013 GMC Sierra 1500 1999 - 2004 GMC…

view full answer...