Weight of Blue Ox SwayPro Weight Distribution Shank for 2" Hitches BXW4000

Question

Question:

do you know the weight of the BXW4000 shank? Thanks!

asked by: Mike W

0

Expert Reply:

The Blue Ox SwayPro Weight Distribution Shank for 2" Hitches part # BXW4000 weighs around 20 lbs.

expert reply by: Conner L

0

Answer 1

Yes, the Blue Ox SwayPro Weight Distribution Shank #BXW4000 can be used in the rise or drop position to fit individual towing applications.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 4

Hey Rick, yes you can just swap out the shank that you have now for one that is designed for a 2-1/2 inch hitch like the Blue Ox part #BXW4028. You probably already know this but you'll most likely need different spring bar tension on the new…

view full answer...

Answer 5

Hey Jason! I'm guessing you have the 12" long shank right now which is the standard. For a longer shank that fits a 2-1/2" receiver you can use the Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 16" Long - 7" Rise,…

view full answer...

Answer 6

Hey Gino, you'll want to take a couple measurements to determine what shank you'd need from a Blue Ox Swaypro to allow your trailer to be towed level. You'll want to measure from the top of your hitch opening on your vehicle down to the…

view full answer...

Answer 7

Yes, we do have a compatible shank for the Blue Ox 2-Point Weight Distribution w/ Sway Control item #BLU75FR. These shanks have the standard 1-1/4" hole spacing so they are compatible with many weight distribution systems. For a 7 hole option…

view full answer...

Answer 8

Hello Bruce, Thanks for writing in! Using butyl tape between the trailer body and the Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" #HP96VR is exactly the route I would go. It stays flexible, creates an…

view full answer...

Answer 9

Hey John, thanks for the picture of your axle tag and welcome back! Based on the capacity of 3,800 lb that I see on the tag the correct lift kit would be the part #K71-707-02. Which Airstream do you have and are you trying to get better ground…

view full answer...

Answer 10

Hey Mark, we have a Weathertech bed mat that fits your 2025 Nissan Frontier with the Impactliner part #WT47EF but we do not have any BedRug options for your truck. This would work just fine with your spray in bedliner and your Utili Track system as…

view full answer...

Weight of Blue Ox SwayPro Weight Distribution Shank for 2" Hitches BXW4000

Product Page this Question was Asked From

Continue Researching