Bearing Buddy Bearing Protector For a 2021 Triton LT WCI-X PWC Trailer
Updated 04/25/2022 | Published 04/23/2022 >
Products Featured in This Question
Question:
I have a 2021 Triton PWC Trailer model LT WCI-X and looking for a set of bearing buddys. Do you know the correct part # that would fit? Thank you.
asked by: Greg
Expert Reply:
According to the parts department at Triton your 2021 Triton LT WCI-X will need the Bearing Buddy Bearing Protectors # BB1980A-SS. This is due to having a Dexter 2,000lb axle under your PWC trailer.
Be sure to use the same grease that you currently have in your hubs when you install the Bearing Buddies. If you are unsure of the grease you will want to clean out all the old grease and I recommend using LubriMatic LMX Industrial Strength Grease # L11390 with your hubs. Having a dedicated Grease Gun # L30416 for your trailer is great to not mix with other grease used for other applications.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.99 Inch
- 2000 lbs Axle
- 2500 lbs Axle
- 3500 lbs Axle
- Bearing Buddy
more information >
Continue Researching
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Video: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector-118804 Feature Review
- Video: Feature Review LubriMatic LMX Industrial Strength Grease
- Shop: Trailer Wiring
- Q&A: Grease Recommendation and Schedule for Dexter EZ Lube Spindles
- Shop: Dexter Multi-Purpose Lithium Grease - 14 oz. Cartridge
- Shop: LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Q&A: Spare Tire For Triton Elite Aluminum Jet Ski Trailer
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Difference Between Bearing Buddy 1980 Models
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Availability of Stainless Steel Idler Hub for 3,500 lb Axle
- Q&A: Correct Hub for Dexter EZ Lube 3,500-lb Axle
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Article: Trailer Lighting Requirements
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How To Measure And Replace Everything In Your Hub Assembly

