Availability of Stainless Steel Idler Hub for 3,500 lb Axle
Updated 02/11/2026 | Published 02/05/2026
Products Featured in This Question
Question:
Hello. Do you have this item with a stainless steel option? AKIHUB-545-35-G-K
asked by: Joey N
Expert Reply:
Hey Joey! Our own etrailer branded hubs like # AKIHUB-545-35-G-K only come with the galvanized or standard finish. For a stainless steel idler hub you need the Kodiak # KH84545S. This does not come with bearings so you can use # BK2-100 for a complete bearing kit.
What kind of trailer are you putting the hub on? I'm assuming it is something like a boat trailer where corrosion is a concern. You can also add the Bearing Buddy Bearing Protectors # BB1980A-SS to keep water and dirt out of the hub/bearings. These have a stainless steel construction as well.
(click to enlarge)
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: etrailer Rust-Resistant 4-Leaf Double Eye Spring for 3.5K Trailer Axles - 25-1/4" - Dacromet
- Shop: Replacement Center Cap for Taskmaster Viking Aluminum Trailer Wheels - 3.19" Pilot - Qty 1
- Q&A: Recommendation For Boat Trailer Wheels Used In Salt Water Environment
- Shop: Kenda Karrier KR35 ST215/75R14 Radial Trailer Tire w/ 14" Gunmetal Aluminum Wheel - 5 on 4-1/2
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Brake Controller
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer jack
- Shop: Gooseneck Hitch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Video: How to Choose a Trailer Brake Controller
- Search Results: trailer leaf springs
on Trailer Hubs and Drums
Joey N.
2/10/2026
I notice the studs are longer than usual. Do you have stainless lug nuts that will fit for this?