Troubleshooting Beeping and Fan Stop of the MaxxAir MaxxFan Roof Vent Fan Model 6200K

Question

Question:

Our Maxx air fan 6200 order from etrailer works great on low speeds but stops and beeps after a few seconds at higher speeds. I saw this reply and wondered if it is a similar issue.

asked by: Matt

0

Expert Reply:

Yes, it does appear as if your MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat, # MA00-06200K has a control board issue. I suggest the Replacement Printed Circuit Board for MaxxAir Manual Lift RV Roof Vents, # MA10A21276K.

expert reply by: Michael R

0

Answer 1

I recommend first checking the power coming to your MaxxFan Plus Roof Vent w/ 12V Fan and Thermostat - Manual Lift - 10 Speed - White #MA00-04000K, it will need to be 12v. If it's not receiving 12v then you could need to increase the wire gauge…

view full answer...

Answer 2

The Replacement Printed Circuit Board #MA10A21275K will fit your MaxxFan Deluxe Roof Vent #MA00-07500K. We also have the Fan Motor #MA10-20968, Lift Motor #MA10-20270 and Operator #MA10-20281K-1AF if you would also want to have these spare parts as…

view full answer...

Answer 3

We do have the exact replacement circuit board you need for your MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat - Manual Lift #MA00-06200K, which is the following part: - Replacement Printed Circuit Board for MaxxAir Manual Lift RV Roof Vents…

view full answer...

Answer 4

I can confirm that the MaxxFan circuit board #MA10A21275K is the same as the 10C21275K that you mentioned as well. This has changed part numbers twice and what we offer is the current version.

view full answer...

Answer 5

Greg, it doesn't actually look like the MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat #MA00-06200K has a rain sensor, but if it did it will automatically close the lid if rain is detected.

view full answer...

Answer 6

It seems you are on the right track. The Replacement Printed Circuit Board #MA10A21276K will indeed be the correct replacement circuit board for your MaxxAir fan. Your serial number indicates the 5100K model fan, which is fairly common.

view full answer...

Answer 7

Since the remote works we know the board isn't totally shot. I'm guessing it is the wiring for the control switch. All you can really do is check that wiring to make sure it is secure and no corrosion is present at both ends. If you decide to…

view full answer...

Answer 8

The correct replacement circuit board you need for your MaxxFan that has powered lift, thermostat, rain sensor, and remote would be the part #MA10A04751KS.

view full answer...

Answer 9

You are correct and all of the settings of the MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote #MA00-07000K that you mentioned are correct. The powered lift can be turned off to allow you to manually lift the lid, this is thermostatically…

view full answer...

Answer 10

This is more than likely a circuit board issue, and to alleviate the issue you'll just need to replace your unit's circuit board. If you have the MaxxFan Plus models: 00-04500K, 00-04700K, 00-04800K, and 00-04900K, or the MaxxFan Deluxe,…

view full answer...

Answer 11

Chris, from what I understand the Replacement Printed Circuit Board #MA10A21275K is still the correct circuit board replacement for your 10C21275 board, despite the looks, and will work with the MaxxFan Plus: 00-04500K, 00-04700K, 00-04800K, and…

view full answer...

Answer 12

It sounds like a circuit board issue. I recommend the Replacement Printed Circuit Board for MaxxAir Manual Lift RV Roof Vents #MA10A21275K if you have a 4500K, 7000K, or 7500K model. If your model is a 4000K, 5100K, or 6200K then Replacement Printed…

view full answer...

Troubleshooting Beeping and Fan Stop of the MaxxAir MaxxFan Roof Vent Fan Model 6200K

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching