Replacement Parts for Dexter Nev-R-Adjust 12 x 2 Inch Electric Trailer Brakes

Question

Question:

I am looking for brake parts for 5.2k Dexter axles. I cant find the correct parts part # 023-106-00 and 023-105-00 but would like a price in never adjust. Do you carry either of them?

asked by: Jeff E

0

Expert Reply:

Those are 12 x 2 Dexter brake assemblies, 5200 capacity, with 5 bolt mounting flange. But the Nev-R-Adjust brakes on these axles should be the 12 x 2 inch brakes. We have several parts available including the following:

Actuating Arm, Left Hand, # BP02-230
Actuating Arm, Right Hand, # BP02-240
Shoe Hold Down Spring, # BP06-090
Shoe Return Spring, # BP07-105 (works on left or right hand sides)
Adjuster Plugs, # BP10-220
Adjuster # BP10-060 (these are regular adjusters so you may need to re-use some parts from the old brakes)

expert reply by: Michael H

0

Answer 1

We do carry a range of trailer brake replacement parts including actuating arms like those shown on the linked page. The actuating arms we offer for AL-KO brakes are for their larger size electric drum assemblies. Part #568237 fits their 12-1/4 x…

view full answer...

Answer 2

Electric Trailer Brake Kit #AKEBRK-35-SA is made overseas but has a very important advantage over the Dexter option. Basically the difference is in the shoes. The pad material on AKEBRK-35-SA is actually cut to length whereas on other assemblies the…

view full answer...

Answer 3

You need Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2, part #8-407-5UC3-EZ. This is the hub comes with the bearings, races, and seals. The drum that is compatible is the Dexter Electric Brake Assembly for…

view full answer...

Answer 4

You are not wrong but at the same time you do not want trailer brakes to lock up. The brakes you have, #23-468-469, are self-adjusting but it takes some time for the shoes to extend out far enough for normal braking. This is why we recommend making…

view full answer...

Answer 5

We do have replacement brake shoe and lining for Hayes/ALKO 12 x 2 inch brakes. It is #BP04-185. The hold down spring, #BP06-090, is sold separately. I'd have to get the bearing numbers that are in your current hub from you or the dimensions of…

view full answer...

Answer 6

Thank you for the picture which allows me to confirm the correct parts. Your Dexter D52 axles under your 2018 Coachmen Freedom Express Blast 271BL toy hauler came with the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-458-459. We do have the…

view full answer...

Answer 7

The assembly you have is our part #K23-479-00. For shoes you'd want the part #K71-699-00. We don't have the magnets for those hubs though. But if the assembly is bad enough to need shoes and magnets you are better off just replacing the whole…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Replacement Parts for Dexter Nev-R-Adjust 12 x 2 Inch Electric Trailer Brakes

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching