Derale Transmission Cooler Adapter for Install on 2005 Jeep Wrangler
Published 04/13/2022
Question:
Want to install a BandM transmission cooler 70265 onto the front of the A/C condenser. But do not want to cut or damage any of the OEM Quick Fit lines. It seems the # D13028 can replace the OEM radiators straight pipe return line connection. Which then allows me run a 3/8inch rubber line off it to the BandM coolers inlet and run another 3/8inch rubber line from the BandM coolers outlet to the original OEM transmission return line end. I do not want to disturb the OEM radiators 90 degree inlet line. Can you please confirm the #D13028 is the correct radiator fitting that I need?
asked by: Dale K
Expert Reply:
The Derale Radiator Adapter Fittings for Dodge and Jeep # D13028 is the correct adapter to use on the radiator of your 2005 Jeep Wrangler when installing a transmission cooler. This is the adapter you'd use to connect from the return line of the factory transmission cooler to the aftermarket cooler you have now.
Continue Researching
- Q&A: How To Use Tow Bar with D-Rings On Jeep Bumper
- Q&A: Can 11/32 Hose or Fittings be Used with 3/8 Inch Transmission Lines on a 2009 GMC Savanna 2500
- Q&A: Should a Transmission Cooler Be installed On a Kia Sorento For Towing
- Q&A: Which Transmission Cooler is Recommended for a Nissan Frontier with 6,500 Pound Towing Capacity
- Q&A: Trailer Hitch, Wiring, and Brake Controller for a 2007 Honda Odyssey
- Q&A: Recommended Transmission Cooler and Hitch for 2019 Kia Sorento LX V6 2WD
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Q&A: Transmission Cooler Recommendation for a 2009 Yukon XL SLT 5.3 Towing an 8000 lb Camper
- Article: Frequently Asked Questions About Transmission Coolers
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)