Recommended Brake Controller For A 2019 Mercedes-Benz GLE

Updated 04/05/2022 | Published 04/04/2022

Question:

Hi, I have 2019 GLE 400 Mercedes Benz with a Tow Package. It has factory wired 7-pin trailer connector. My understanding is that 7-pin connector already carries a brake signal. Considering this, do I still need a brake controller if I want to tow a 5000lb. Appreciate your advise

asked by: Gaston C

Helpful Expert Reply:

When it comes to installing a brake controller on your 2019 Mercedes Benz GLE with a tow package, I recommend The Tekonsha Voyager Trailer Brake Controller - 1 to 4 Axles - Proportional # 39510. Since your vehicle already has the 7 pin it does have an active brake line to run to the controller, but it wont carry the signal without the controller. This controller can be mounted within a 90-degree vertical range, so you can mount it away from your knee.

With your trailer only being 5,000 pounds you would not need to go to a higher capacity controller. Since you already have the 7 pin connector on your vehicle you will also need The Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3066-P. The custom connector end plugs into the built-in port beneath the dash of your device.

I have attached a review video link below.

expert reply by: Noah E