Recommended Camper Tie Downs for 2017 Ford F-350 Super Duty Crew Cab DRW

Question

Question:

I own a 2017 Ford F-350 duelly with a factory hitch. Which model would be best for me to use with a slide in camper. Non list duel wheels as an option. Thanks for your assistance My truck has an 8 ft bed, I’d diesel and has a full 4 doors, I would assume a super crew. The running boards stop at the back of the rear door.

asked by: Chris A

1

Helpful Expert Reply:

For a 2017 Ford F-350 Super Duty DRW, with 8' bed and without board or step underneath truck bed. You have the very cost effective option of the Brophy Clamp On Camper Tie-Downs, # HSWB which are powder coated steel brackets that securely clamp onto your truck bed's side rails. You will combine this with the Brophy Basic Turnbuckles w/ Hardware, # TDHP. I like this set up for a larger truck such as yours with the DRW because it is very cost effective, simple to install and it just simply works. If you want to mount the camper on your truck and rarely remove, this is the best option.

If you intend to load and unload the camper frequently and want the tiedowns out of the way, I suggest you go with the TorkLift Custom Frame-Mounted Camper Tie-Down, # TLF2021 for the front and # TLF3008 for the rear. This is a frame mounted style camper tie-down that secures the camper to truck's base instead of its bed and the inserts can easily be removed by pulling the pins when not in use. You will want to use the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs, # TLS9529-2-LK for black finish. Or select # TLS9522-2-LK for gray and # TLS9526-2-LK for polished stainless steel.

expert reply by: Michael R

1

Answer 1

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Answer 2

There are some trucks that the Brophy Clamp On Camper Tie-Downs, part #HSAB will not fit and your 2005 F-150 is among that list. We do have tie-downs that will fit your truck but there are a few things that are required to make sure you get a good…

view full answer...

Answer 3

Yes, the Brophy Clamp On Camper Tie-Downs part #HSWB are a fit for a 2012 Ford F-150 with 6-1/2' Bed. If you're looking for some turnbuckles to go with these, I recommend the Brophy Basic Turnbuckles part #TDHP. I have attached a review for…

view full answer...

Answer 4

Since the Brophy stake pocket mount tie downs, #TDSF, bolt into place, you would just need to un-bolt them from the truck to remove them for the season. It would be a good idea to then apply some sort of rust prevention where the hardware for the…

view full answer...

Answer 5

We have just what you are looking for. The part #A10-1530DVP will plug in to the 110 receptacle of your generator and would give you a 30 amp female connector for the RV to plug into.

view full answer...

Answer 6

According to CR Brophy, the camper tie down brackets you'd looked at, part #HSWB are specifically designed to fit the bed of a 2019 Ford F-250 and 350. There does indeed need to be 2 inches of available space under the lip of the truck bed side…

view full answer...

Answer 7

Yes, the Brophy Clamp On Camper Tie-Downs Item #HSWB and the Brophy Basic Turnbuckles Item #TDHP are not only safe for use on your 2020 Ford F-250, they are a confirmed fit.

view full answer...

Answer 8

Unlike most of the other Brophy camper tie downs the #HSWB have been test fit on your 2017 Ford F-350 so we know they will fit well without any interference or measuring required to verify fit.

view full answer...

Answer 9

I spoke with my contact at Brophy and they stated you'll be fine using the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item #HSWB as long as the railing on the back of your 2008 Chevy Silverado isn't over…

view full answer...

Answer 10

There are several different 5th wheel towing capacities for a 2018 Ford F-250 that will vary by engine size, axle ratio, GCWR, cab type, box length, and drive type. In order for me to give you the exact 5th wheel towing capacity I would need to know…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hi KJM; assuming you have the factory trailer hitch the correct TorkLift camper tie-downs for your 2024 Sierra 3500 dually is the Custom Fit Tie Down Kit With TL44FR | TL84FR #TL94PR. This will fit with that built-in step you're referring to as…

view full answer...

Recommended Camper Tie Downs for 2017 Ford F-350 Super Duty Crew Cab DRW

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching