Replacement Hinge Seal For Extang Encore Tonneau Cover on Ford F-150

Question

Question:

need hinge seals for extang encore tonneau cover for 2017 F150 6.5 bed

asked by: Tony C

0

Expert Reply:

We do indeed have the replacement hinge seal for the Extang Encore tonneau cover on your 2017 Ford F-150, which you can get with the following:

- Replacement Hinge Seal for Extang Encore Tonneau Covers # EX32620464

expert reply by: Kyle S

0

Answer 1

Hey, Wayne. After some checking, It looks like the hinge seal for the Encore cover were recently discontinued and are no longer available for us to get directly from Extang. Sometimes they will keep some stock for themselves to last a bit longer so…

view full answer...

Answer 2

Thanks for reaching out, Marion! The Replacement Hinge Seal #EX32620464 includes 1 seal that measures 64-1/2" long so if you need to replace 4 of yours, then you'll need to order 4 of these. You'll trim any excess of the seal once you…

view full answer...

Answer 3

Replacement Hinge Seal #EX32560669 is sold in quantities of 1. It is 69 inches long and was designed as a replacement for Extang Solid Fold 2.0 Tonneau covers. But it would likely fit (but hasn't been tested) with other, similar covers. The only…

view full answer...

Answer 4

Hey Doug, yes the Replacement Hinge Seal part #EX32620464 is the correct hinge seal for your Extang Encore Tonno cover.

view full answer...

Answer 5

Hi Jason; we do have the Replacement Hinge Seal for Extang Encore Tonneau Covers #EX32620464 in stock so you can order those for your cover. I do not have an alternative seal that will fit.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Hinge Seal For Extang Encore Tonneau Cover on Ford F-150

Continue Researching