Availability of Replacement Hinge Seal for Extang Encore EX32620464

Question

Question:

I am trying to find replacement seals for an Encore tonneau cover ex32620464. These seem to be out of stock. Is there any other that will fit?

asked by: Jason

0

Expert Reply:

Hi Jason; we do have the Replacement Hinge Seal for Extang Encore Tonneau Covers # EX32620464 in stock so you can order those for your cover. I do not have an alternative seal that will fit.

expert reply by: Robin H

0

Replacement Hinge Seal
(click to enlarge)

Jason

9/20/2025

I am still having trouble finding this particular number on your website.

Robin H.

9/21/2025

@Jason when I wrote that we had several in stock. It looks like since then we sold what was left and that is the last of them, which is also why the part number is no longer linked. Extang discontinued the seals back in May.

Jeff

8/8/2026

@RobinH will the seal replacements for the extang solid fold 2.0 work as an option for the encore seals?

Answer 1

The Replacement Tailgate Seal for Extang EnCore Tonneau Covers #EX32620278 is designed to fit over the channel at the rear of an Encore tonneau cover. It's a matter of removing the panels that give you access to the channel, sliding the old one…

view full answer...

Answer 2

We do indeed have the replacement hinge seal for the Extang Encore tonneau cover on your 2017 Ford F-150, which you can get with the following: - Replacement Hinge Seal for Extang Encore Tonneau Covers #EX32620464

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 9

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Availability of Replacement Hinge Seal for Extang Encore EX32620464

Featured Help Information

Miscellaneous Media

Continue Researching