Can Light Kit be Added to Hitch Bike Rack

Question

Question:

Hi, I have a 2020 Toyota Highlander Hybrid XLE. I bought a trailer hitch from you guys to mount my bike rack on. But when I put the bikes on they block the tail lights. I would like to add a wiring bundle and some types of rear lights that can be attached to the bike rack. Can you help me decide? Thanks!

asked by: Patrick M

0

Expert Reply:

You could use the LED kit part # 98174LED for a light kit and then use the bracket # BK70BB to mount the lights to your bike rack and the taillights would all be visible.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 4

Hey Donna, yes the Replacement Grease Cap for Dexter/Tie Down Engineering Vortex Trailer Hubs #DE69NR that you referenced does work as a replacement for your Dexter 21-261 cap. How do you like the Vortex trailer hubs?

view full answer...

Answer 5

Hello James, thanks for reaching out. Both the kits you mentioned, the Hydrastar #HYD22FR and #HYD42FR are complete conversion kits for standard 3,500 lb axles. The difference is the calipers included with each kit. The #HYD22FR has stainless steel…

view full answer...

Answer 6

The channel of the Demco 21K #DM16080-52 coupler is 3 inches deep. The distance from the center of where the trailer ball would sit to the first 5/8 inch hole is 7 inches, and 12 inches to the second hole. The Titan #T4853100 dimensions are a little…

view full answer...

Answer 7

It sounds like you are needing a license plate bracket and lights for your hitch-mounted cargo carrier. We have just the thing here. For the license bracket, we have the etrailer License Plate and Tail Light Mounting Brackets for Hitch Mounted Cargo…

view full answer...

Answer 8

The cargo bag I highly recommend for your Pro Series Cargo Carrier #63153 is the etrailer Cargo Bag #988501. It has 20 cubic feet of storage, is waterproof with PVC coated nylon, and has six tie-down straps that will secure it to your Pro Series…

view full answer...

Answer 9

The lights that come with the #98174LED and #20174 are in fact the same size with approximate dimensions of 6-3/4" x 2-1/2". We have confirmed that these fit the Rola 59502 and have had customers successfully install them on this cargo…

view full answer...

Answer 10

Although nothing is completely theft-proof when placed in an open cargo carrier like part #C18110, you can take some measures to make it a lot tougher for thieves. If the cargo can be placed in one container or bag like the etrailer Cargo Bag, part…

view full answer...

Answer 11

In most cases only a link or two extra is hanging which would be enough to swing and hit anything on your vehicle. If there were more links than that dangling Titan recommends removing them to prevent damage like you mentioned.

view full answer...

Answer 12

The biggest thing to note for your 2021 GMC Sierra 1500 with 275/60R20 tires is that the owners manual states not to use tire chains with this vehicle and tire combination. The reason for this is that There is not enough clearance. Tire chains used…

view full answer...

Can Light Kit be Added to Hitch Bike Rack

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching