How to Measure for the Correct Dust Cap?
Updated 03/29/2022 | Published 03/25/2022
Products Featured in This Question
Question:
I have a trailer boat. Put bearings in and found out that the dust covers are different sizes. Are the correct bearings in the hubs
asked by: Pamela S
Expert Reply:
If the bearings you took off of your boat trailer match the new ones then you'll have the correct bearings. To replace the dust covers you are going to want to measure the inside of the hub where the grease cap inserts or you can measure the outside edge of the cap behind the ridge where it inserts into the hub. The diameter does need to be a precise measurement so you will want to use the Performance Tool 4" Carbon Fiber Digital Caliper item # PTW80157. If you are worried about the bearings you put on not being correct you can also use the caliper to measure your spindle and see if the bearings you bought are the correct size. The bearings will have a number stamped into them that you will be able to easily find the diameter of. If you need any further help feel free to message me back with the hub diameter, bearing numbers, or spindle size and I will find you the correct bearings and dust caps.
I have linked a diagram below that will show you the measurements you will need to find.
(click to enlarge)
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2047 - Chrome Plated - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.05 Inch
- 2000 lbs Axle
- Bearing Buddy
more information >
Continue Researching
- Video: The Low-Down on the Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel
- Search Results: 480/400~8 trailer tires and wheels
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel - 4 on 4 - Load Range C
- Video: The Low-Down on the TowSmart Trailer Winch
- Shop: TowSmart Trailer Winch - Single Speed - Ratcheting - 20' Strap - 1,500 lbs
- Search Results: trailer winch strap
- Search Results: trailer jack
- Search Results: trailer winch
- Shop: BoatBuckle Kwik-Lok Gunwale Tie-Down Strap - 2" x 13' - 400 lbs - Qty 1
- Shop: BoatBuckle Kwik-Lok Gunwale Tie-Down Strap - 2" x 10' - 400 lbs - Qty 1
- Shop: Bearing Buddy Bearing Protectors - Model 2080T-SS - Threaded - Stainless Steel - Qty 2
- Shop: Bearing Buddy Bearing Protectors - Model 2080 - Chrome Plated - Qty 2
- Video: Detailed Breakdown of the Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel
- Video: Review of Kenda Trailer Tires and Wheels - Tire with Wheel - AM30040
- Search Results: load range
- Search Results: 480x8 tire
- Q&A: Recommended Trailer Axle Bearing Dust Cap Compatible with 2.10 Inch Hub
- Q&A: Cap Recommendation to Hub Bore 2.44 inches
- Q&A: What Tire Pressure Is Recommended On 4.80/4.00-8 Load Range C Trailer Tire For Highway Speeds
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Q&A: Can 4.80-12 Size Trailer Tires Be Changed to 4.80-8 Size
- Q&A: Can 8 Inch Trailer Tires be Replaced with 12 Inch Trailer Tires
- Video: Feature Review TowSmart Trailer Winch
- Q&A: Minimum Mounting Bolt Distance Compatible with Fulton and TowSmart Single Speed WInches
- Q&A: Replacing the Winches on a Sea-Doo Trailer
- Search Results: trailer tires and wheels
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
on Trailer Bearings Races Seals Caps
