Replacement Trailer Brakes, Hubs and Bearing Kit for 2010 Airstream International 23D Travel Trailer
Updated 03/31/2022 | Published 03/25/2022 >
Products Featured in This Question
Question:
Morning... I have a 2010 Airstream 23D International Signature Series... I believe I found the correct brake kits on the website K23-472-473-00... The trailer axles are Dexter #1616631 I have a photo of the axle tag if you need it?... 14 rims and I believe they are 3000lb axles two on the trailer... I would like to get a drum and bearing kit or individually if kit not available but Im not sure which is the correct one on the website. Is there anyway you can assist and advise? Thank you
asked by: Mario S
Helpful Expert Reply:
I reached out to Dexter who confirmed that your Dexter axle on your 2010 Airstream came with the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469. As your trailer is 12 years old the brakes may have been changed but the size would be the same. This will use a Dexter Trailer Hub and Drum Assembly # 84546UC3-EZ if your drums are warped or beyond their service life.
We do have the Bearing Kit # BK2-100 that will provide new bearings, races, grease seal, tang washer and cotter pin for one hub if your drums can be reused.
Product Page this Question was Asked From
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Search Results: grease cap
- Search Results: hub cap
- Video: Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans Review
- Q&A: How to Know When Trailer Brake Magnets are Worn Out and Need Replacing
- Q&A: How to Switch From Grease Hubs to Oil Bath Hubs on 3500-lbs Axle
- Shop: Kodiak XL ProLube Kit for 3500-lb Axles
- Q&A: Replacement Motor and Diagram for Ventline Vanair Trailer Roof Vent
- Q&A: Replacement Motor for Dexter Ventline 1.2 Amp Bathroom Fan Motor Model V2094
- Q&A: Grease to Oil Bath Trailer Hub Conversion Kit for 3500 Pound Axles
- Shop: Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans
- Shop: Ventline Vanair Trailer Roof Vent w/ 12V Fan - 6-1/4" Diameter - Smoke
- Shop: Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans - Canada Approved
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Hitch
- Search Results: trailer brakes
- Shop: Trailer Wiring
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Search Results: trailer hubs and drums
- Search Results: trailer hitch
- Shop: Brake Controller
- Search Results: trailer tires and wheels
- Shop: Suspension Enhancement
- Shop: Gooseneck Hitch
- Search Results: trailer jack
- Shop: Fifth Wheel Hitch
- Shop: Vehicle Tow Bar Brake System
- Q&A: Parts Needed to Add Brakes to a 3.5K Single Axle Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles

