Cargo Carrier Light Kit for etrailer Cargo Carrier

Question

Question:

Do you have a light kit specific to this particular cargo rack? Additional lights on the rack is pretty much a necessity when your cargo obscures the RV mounted lights.

asked by: Dave S

0

Expert Reply:

For the 24x84 etrailer Cargo Carrier for RV Bumper, # e96ZR I recommend the Cargo Carrier Light Kit, # 52014. Use 48" Car and Trailer End Loop 4-Pole, # 18044 for an extension if needed.

expert reply by: Michael R

0

Answer 1

The 24x84 etrailer Cargo Carrier for RV Bumper part #e96ZR can hold a spare tire but there isn't any sort of specific mount for this. The photo attached below is a custom job from a neighbor and I'm not totally sure what they used to create…

view full answer...

Answer 2

Hi Tom; the 24x84 etrailer Cargo Carrier for RV Bumper #e96ZR comes with the support brackets to reinforce your bumper. You do not need to purchase the #MO22FR separately.

view full answer...

Answer 3

I think we may have a solution that will work for you as we offer a very wide variety of spare tire carriers. However, I would really need to see a photo of you setup in order to offer the best advise. The issue you will run into trying to find a…

view full answer...

Answer 4

The answer is actually yes to both; you can convert the 84" wide carrier to a 60" wide carrier, and conversely the 60" carrier can be converted to an 84" wide carrier with the extension. To go from 60" to 84" here's…

view full answer...

Answer 5

Yes, the 24x84 etrailer Cargo Carrier for RV Bumper #e96ZR that you referenced does come with bumper support brackets.

view full answer...

Answer 6

Yes, you can absolutely get the support brackets from the etrailer cargo carriers for RV Bumpers #e99049 separately. The correct part number for those support brackets are the following: - Mount-n-Lock SafetyStruts Universal RV Bumper Support…

view full answer...

Answer 7

The brackets on the 24x84 etrailer Cargo Carrier for RV Bumper part #e96ZR are not movable. That said, what you can do is slide the carrier left to right which would allow you to make room for a trailer hitch if present. Therefore, the carrier may…

view full answer...

Answer 8

The carrier in your picture looks like it's welded to the rear bumper so the closest option we would have would be the 24x84 etrailer Cargo Carrier for RV Bumper #e96ZR that you were looking at. This carrier comes with brackets that can fit…

view full answer...

Answer 9

The Swagman E-Spec 2 Bike Rack #S94FR with the separate Fat Tire Adapter Kit #S64679 fits tires up to 5 inches wide. This bike rack is designed extra sturdily so that it can be attached to your motorhomes and fifth wheelers while also having they…

view full answer...

Answer 10

In order to determine the capacity of the rear bumper on any fifth wheel trailer you'll need to reach out to the trailer manufacturer as we don't have this information. That said, it's typically around the 200 lb mark. If you need/want…

view full answer...

Answer 11

We have the 24x84 etrailer Cargo Carrier for RV Bumper, #e96ZR. From available online specs, the exterior width of the Wolf Pup is listed at 85". We also have the 64" #e83YR, a 60" wide version under part, #e99049 and a 40"…

view full answer...

Answer 12

The bolts in the 24" Extension #e99052 are for mounting to either the 24x40 etrailer Cargo Carrier #e99050 or 24x60 etrailer Cargo Carrier #e99049. This will turn either carrier into the larger 24x64 etrailer Cargo Carrier #e83YR or 24x84…

view full answer...

Cargo Carrier Light Kit for etrailer Cargo Carrier

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching