Does 24x84 etrailer Cargo Carrier for RV Bumper # e96ZR come with Support Brackets

Question

Question:

Does this bumper rack come with the bumper supports that reinforce the bumper? It shows them in some pictures but doesn’t in others…

asked by: Andrzej M

1

Helpful Expert Reply:

Yes, the 24x84 etrailer Cargo Carrier for RV Bumper # e96ZR that you referenced does come with bumper support brackets.

expert reply by: Jameson C

1

Everything that Comes with etrailer Cargo Carrier for RV Bumper
(click to enlarge)

Answer 1

The distance between each of the mounting brackets of the 24x84 etrailer Cargo Carrier for RV Bumper #e96ZR is 27-9/16 inches. The picture I attached came from the install instructions which are also linked on this page as well.

view full answer...

Answer 2

The carrier in your picture looks like it's welded to the rear bumper so the closest option we would have would be the 24x84 etrailer Cargo Carrier for RV Bumper #e96ZR that you were looking at. This carrier comes with brackets that can fit…

view full answer...

Answer 3

For your 2021 KZ Connect I recommend using one of our etrailer RV Cargo Carriers. They are available in different sizes for the size of the gear you wish to carry. Do be sure to contact your KZ dealer to determine how much weight your rear bumper can…

view full answer...

Answer 4

All of our cargo carriers like the 24x60 etrailer Cargo Carrier for RV Bumper #e99049 you checked out all come with the support brackets. Currently, we do not offer the cargo carrier without the support bracets.

view full answer...

Answer 5

The distance between the mounting brackets for the 24x64 etrailer Cargo Carrier for RV Bumper #e83YR is 17-5/8", but if you need more space than that I got the okay for you to avoid using the center bracket which would then increase that…

view full answer...

Answer 6

Yes, you can absolutely get the support brackets from the etrailer cargo carriers for RV Bumpers #e99049 separately. The correct part number for those support brackets are the following: - Mount-n-Lock SafetyStruts Universal RV Bumper Support…

view full answer...

Answer 7

Hey Steve, We do not carry bumpers for trailers/RVs that are going to be rated for towing. What I recommend is going with a frame mounted hitch like #82201 that would bolt or weld onto your frame which sounds like its 68-1/2" wide. That hitch is…

view full answer...

Answer 8

If the height of the I-beams is less than 6" as you say then you would have to have to swap out the regular safety struts for the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets #MO34VR, which include spacers to place the brackets…

view full answer...

Answer 9

Since you have a RAM brand a-frame powered jack the correct replacement foot is the part #EJ-3520-FT.

view full answer...

Answer 10

While we do not carry just the tube for your 2017 Jayco White Hawk Travel Trailer's electric jack, we do carry other replacement parts for the jack and full-on replacement jacks. As a full replacement, the etrailer Electric Jack - A-Frame, part…

view full answer...

Answer 11

It won't because the grove in the leg is different enough that they aren't compatible, however I have another option that will. It is the Replacement Drop Leg for Bulldog Round Trailer Jack or Powered Drive Camper Jack item #BD500190. This is…

view full answer...

Answer 12

I do have some options for you but you'll notice the 24x84 etrailer Cargo Carrier for RV Bumper part #e96ZR has three points of contact which is what allows it to support such a long load. The 24x60 Curt Cargo Carrier for 2" Hitches part…

view full answer...

Does 24x84 etrailer Cargo Carrier for RV Bumper # e96ZR come with Support Brackets

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching