bing tracking image
Q & A Icon

Replacement Control Board And Wiring Harness For Atwood G6A-7E Water Heater  

Updated 03/04/2022 | Published 03/02/2022

Question:

I have a replacement control board for my GC6A-7e Water heater . it is a 12vol only . It ignites but the blue wire to the light quit. I replaced it with the 91367 control and it wont ignite or anything . does it have to be rewired for my application. I have 4 wires . A brown from thermostat then a space , the blue wire , then red wire space then the green . maybe they have a wiring connector . thank you .

0

Expert Reply:

The Replacement Control Panel for Atwood Water Heaters # AT91367 is the correct replacement for your Atwood G6A-7E water heater.

You should not need to re-wire anything, however you may also need the Replacement 4-Wire Control Harness for Atwood Water Heaters # AT93312. This will supply power from the control board to other parts of the water heater.

I have attached a couple of videos for you to check out as well.

expert reply by:
0
Bryce D

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>