Replacement Glass Top for Furrion FS21DB4A-SS 2-in-1 Range Oven

Question

Question:

I have the furrion 2- in - range model # FS21DB4A-SS and I need to replace the glass cover.

asked by: Eric B

0

Expert Reply:

The correct glass top for your Furrion FS21DB4A-SS is the Replacement Stainless Steel Top with Glass Cover for Furrion 2-in-1 Range Oven # C-FSRE21SA-SS-003. The only way to replace the glass cover is to replace the whole top.

expert reply by: Scott S

0

Answer 1

Hi Paul, great question and I’m really glad you checked before trying to swap it over. The hitches made for the 2024 Ioniq 5 do not fit the 2025 or 2026 models due to design changes on the newer vehicles, so your existing hitch will not transfer…

view full answer...

Answer 2

Accidents happen to the best of us on occasion, so we do have a replacement top for you. It looks like you have the Furrion 2-in-1 Range Oven with Glass Cover FSRE17SASS, though just the front piece of the glass top by itself is not available as a…

view full answer...

Answer 3

Hey Bruce! Sorry but to replace the glass on your Furrion 2-in-1 Range Oven you need to replace the entire top. The correct one for your model FS21DB4A-BL is the Replacement Glass Top for Furrion 2-in-1 Range Oven item #C-FSRE21SA-SS-003 you were…

view full answer...

Answer 4

For your Furrion stovetop part number fs21db4a-bl the correct replacement top is the part #C-FSRE21SA-SS-003.

view full answer...

Answer 5

In order to find the model number on the Furrion 2-in-1 Range Oven part #FSRE21SABL you will need to pull this out away from the cabinets and then look on the left hand side of the unit for a white sticker with barcode which should then display the…

view full answer...

Answer 6

Hey Johnny, thanks for reaching out! To replace the front glass on your Furrion stove you'll have to replace the whole door. Here are the options available: - 17" Black #715326 - 21" Black #FR66NR - 17" Stainless Steel #FR52FR -…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Glass Top for Furrion FS21DB4A-SS 2-in-1 Range Oven

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching