Does The Bearing Buddy Protect the Bearing from Water
Updated 08/09/2013 | Published 08/08/2013 >
Question:
does the plastic cap stop water from going into the bearing area? and is there a plastic cover bearing buddy calls it a bra for added protection? i would like to use both the plug and the cover.
asked by: Troy M
Expert Reply:
When the hubs get hot, and then backed into water for unloading, they have a tendency to suck water into the hub. Normal dust caps will not offer much protection. If you are looking for a bearing cap replacement that keeps out water and dirt, then the Bearing Buddy would be what you need to consider. The Bearing Buddy, like part # BB1980A-SS that fits a 1.980 hub bore, also includes the rubber protectors.
You would have to either have the outer bearing number, or take an exact measurement of the hub bore, by using either a dial or digital caliper. This will help determine which Bearing Buddy is the best fit for you. I have linked you to a video demonstrating the installation of the Bearing Buddy.
Please note that you will need a double lip seal to prevent the grease from blowing out when you are adding grease.
Product Page this Question was Asked From
Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- EZ Lube Grease Cap
- 1.99 Inch O.D.
- 1.99 Inch
- 2000 lbs Axle
- 2200 lbs Axle
- 2500 lbs Axle
- 3000 lbs Axle
- 3500 lbs Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: All About the Grease Seal
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Bearing Buddy Bearing Protectors - Model 2328SS - Stainless Steel - Qty 2
- Shop: DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug - 1.98" Outer Diameter
- Shop: Bearing Buddy Bearing Protectors - Model 2328A-SS w/ Auto Check - Stainless Steel - Qty 2
- Shop: Grease Seals 10-36 - Double Lip - I.D. 2.250" / O.D. 3.376" - 5.2K to 8K Axles
- Shop: Bearing Buddy Bearing Protectors - Model 2328A w/ Auto Check - Chrome Plated - Qty 2
- Shop: Bearing Buddy Bearing Protectors - Model 2047A w/ Auto Check - Chrome Plated - Qty 2
- Q&A: Trailer Hub Grease Seals Need to be Greased before Install
- Q&A: Does Install of Grease Seal in Hub Require Greasing Hub Bore
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Search Results: bearing buddies
- Shop: Bearing Buddy Bearing Protectors - Model 2328 - Chrome Plated - Qty 2
- Q&A: Will Bearing Buddies Prevent Water from Getting into Hub
- Q&A: Where Does O-Ring of Dexter Vault Kit # DX52UR Go
- Q&A: Proper Way to Tighten Trailer Spindle of Castle Nut
- Q&A: Best Solvent to Clean Old Grease Off Bearings
- Q&A: Trailer Wheel Seems Stiff, Not as Easy to Turn After Repacking Bearings with Grease
- Search Results: spindle wear sleeve
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer hitch
- Shop: Suspension Enhancement
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer jack
- Search Results: trailer wiring


