Replacement Rubber Plug for EZ-Lube Grease Cap on Tow Dolly
Published 02/17/2022
Products Featured in This Question
Question:
I have a stehl tow dolly that uses ez lube hubs with metal caps to grease. The cap has a small hole about 3/4 inch for the rubber dust cover. I havent been able to buy the small rubber dust covers. I found larger ones. Can you help me
asked by: Paul G
Expert Reply:
The only rubber dust covers we offer for EZ Lube grease caps are # RG04-010, which are designed to fit a 1.18 inch diameter hole in the grease cap to allow access to the grease zerk without removing the cap. Your best bet would be to simply replace your existing grease caps.
If the outer bearing is # L44643 or # L44649, use the # RG04-040 grease cap with removable plug. This is compatible with most 2000-3500 lb capacity hubs which is typical of what's found on most tow dollies.
To be sure this is the correct cap for you, just measure the inside diameter of the hub bore where the cap installs. If it's 1.98 inches, the # RG04-040 would be the correct replacement grease cap.
If you get a different measurement, let me know and I'll look for a suitable replacement.
Product Page this Question was Asked From
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: trailer dolly
- Search Results: cargobuckle ratchet straps
- Search Results: cargobuckle tie down anchors
- Search Results: add promo code
- Search Results: retractable
- Shop: Parkit360 Force Electric Trailer Dolly - 2" and 2-5/16" Hitch Balls - 5,000 lbs
- Shop: Ultimate Trailer Jack - A-Frame - Topwind - 27-1/2" Lift - 2,000 lbs
- Shop: Erickson Re-Tractable Ratchet Straps w Buttons - Bolt On - 2" x 5-1/2' - 1,333 lbs - Qty 2
- Shop: BoatBuckle G2 Retractable, Ratcheting Transom Tie-Down Straps - 43" Long - 833 lbs - Qty 2
- Shop: CargoBuckle G3 Retractable Ratchet Tie-Down Straps - Bolt On - 2" x 6' - 1,167 lbs - Qty 2
- Shop: Gorilla Retractable Ratchet Straps - S-Hooks - 1" x 10' - 400 lbs - Qty 2
- Shop: Gorilla Ratchet Straps - Double J-Hooks and D-Ring - 1-1/2" x 14' - 1,667 lbs - Qty 2
- Q&A: Difference In Working Load Limit Between CargoBuckle Tie-Downs
- Q&A: Longer Ball Mount Solution for Camper Towing with Tailgate Down for Added Clearance
- Q&A: Trailer Jack to Avoid Tailgate Clearance Issues
- Q&A: Recessed Ratchet Strap or D-Ring Anchors
- Video: A Closer Look at the Ultimate Trailer Jack
- Q&A: Lowest-Profile A-Frame Trailer Jack For Tailgate Clearance
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Electric Trailer Brakes: How They Work & What to Buy