Will the AMPLock Trailer Coupler Lock for Flat Lip 2-5/16 Couplers Work with an Underslung Coupler

Question

Question:

My rig has an underslung hitch.... will this lock work?

asked by: Robert A

0

Expert Reply:

I do have an option for you but the AMPLock Trailer Coupler Lock for Flat Lip 2-5/16" Ball Couplers part # AMP74FR is designed for overslung trailer couplers. I recommend the AMPLock Trailer Coupler Lock for Underslung part # AMP56FR instead which is designed for underslung couplers.

expert reply by: Conner L

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hello Vernon, Great question. I actually reached out to Coleman-Mach to make sure. Based on what they told me, if your Keystone Alpine 3220RL was equipped with the In-Command system and factory prepped for a third AC, the Coleman-Mach Mach-C Everest…

view full answer...

Answer 7

For your Aluma 6810 HBT trailer, I recommend the Erickson Horizontal E-Track - Zinc Coated Steel - 2,000 lbs - 5' Long - Qty 1 #E19148 along with the E-Track Backing Plate - Zinc Plated Steel - 6" Long x 6" Wide #e96RR. This will save…

view full answer...

Answer 8

We have a few options for your coupler with a 4-1/2" lip. The etrailer Trailer Coupler Lock #e98895 is a good lock. From there we move up to the better Trimax Dual Purpose Coupler Lock #TMX67FR which uses a hardened steel construction. The…

view full answer...

Answer 9

It is possible to move a trailer by just attaching to it's safety cables. Most people would avoid the method you described as the trailer will slam into the back of the tow vehicle while stopping. Basically it wouldn't be a thief's ideal…

view full answer...

Answer 10

Thanks for the picture TJ! Nice set up. Sorry, but the new Furrion Chill Cube item #LC54DX is only compatible with other Furrion Cube components. This is because of the new EPA regulations with the R32 refrigerant. You would need to purchase the…

view full answer...

Answer 11

Hey Lou, thanks for reaching out. We do offer a storage cover that will fit your 2021 Intech Sol Dawn camper trailer. For that I recommend the following: - Adco SFS AquaShed RV Cover for Travel Trailers up to 15' 1/4" Long - Gray #290-52238…

view full answer...

Answer 12

Hey Steve, yes a Rock Tamers mud flap kit like the part #RT47VR would work with the Weigh Safe adjustable ball mounts part #WS68RR and #WS56ZR. The ball mounts have enough clearance on the shank to allow the Rock Tamers to fit.

view full answer...

Will the AMPLock Trailer Coupler Lock for Flat Lip 2-5/16 Couplers Work with an Underslung Coupler

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching