What 9-Inch Feet Pads do You Recommend for My Lipper Jacks?

Question

Question:

I have 9-inch Lippert jack feet and am looking for a 6-pad system. What do you recommend?

asked by: Vicky

0

Expert Reply:

For your 9-inch Lippert jack feet, I recommend the Stromberg Carlson RV Jack Pads for 9" Round Jack Feet # SC49MR. It comes with 6 pads and works to fit the contours of your Lippert feet. The pads include built-in drains that release moisture and prevent your jack feet from corroding.

expert reply by: Bob C

0

Answer 1

Hey Mike, it is important that you use the included power cable with the Furrion Vision S+ Wireless RV Backup System w/ 1 Camera #FR57AD like the instructions indicate. If this is like a hardwire install I would look for a cigarette lighter to 2-wire…

view full answer...

Answer 2

Hey Luke! What kind of trailer do you have? Yes, the Furrion Vision S+ Wireless RV Backup System #FR57AD will fit where the old Vision S was. They use the same mounting bracket and wiring so it should be an easy swap. The only thing that isn't…

view full answer...

Answer 3

Determining which SnapPads fit your 2022 Grand Design Solitude 380FL, the diameter of each jack foot needs to be measured and determine the shape of the foot. Note that it is not uncommon for different shapes and sizes to be used between the front…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 9

From what I can find the Norcold N306.3 fridge has a 2.7 cu ft capacity and is 20-1/8" wide and 26" tall. The most similar option we can offer is the 3.2 cu ft Everchill RV Mini Refrigerator #324-000111. The #324-000111 measures…

view full answer...

Answer 10

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 11

Hey Ken, yes the Replacement Pad for SnapPad Jack Stand Pad System #SP74FR that you referenced is made by Snappad. This is for sure not a knock off! What camper do you have?

view full answer...

Answer 12

Hey Bill, yes the Furrion Vision S+ #FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.

view full answer...

What 9-Inch Feet Pads do You Recommend for My Lipper Jacks?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching