Front and Rear SumoSprings for a 2022 Ford E-350 E Series Cutaway

Question

Question:

I have a 2022 Ford E-Series Cutaway and I am looking for front and rear Sumosprings. This is on a Ford E-350.

asked by: Betsy

0

Expert Reply:

Yes, we do have a set of front and rear Sumosprings for your 2022 Ford E-Series Cutaway motorhome. For the rear you will want the SumoSprings Solo Custom Helper Springs - Rear Axle item # SSR-130-47. These helper springs have a 5,000 lbs capacity that helps to level the heavy rear end of your motorhome. They also help to prevent sway.

For the front end you will want the SumoSprings Maxim Custom Helper Springs - Rear Axle item # SSR-106-47-1. These have a 1,500 lbs capacity that will keep your front end level while driving. This will make your motorhome easier to handle and helps to prevent driver fatigue.

I have linked a couple of installation and review videos.

expert reply by: Jerred H

0

Answer 1

Hi Jeff, I can give you a hand here with suspension upgrades for your 2023 Jayco Greyhawk 27U, though honestly I'd go a different route than the Timbrens #TFEF350 and #TFERSD you mentioned. They'll do their job, but my goodness they can be…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 6

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 7

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 8

Hi Todd, I know exactly the feeling you’re describing, and you’re definitely not alone. That floaty, pushy feeling at highway speeds, especially when trucks pass, is really common on the Sprinter 3500 chassis with a taller coach like your Tiburon,…

view full answer...

Answer 9

Thanks for the information David and welcome back! The Hellwig Rear Anti-Sway Bar item #HE78RR is the correct one for a 2026 Ford E-450 chassis. However, for the front you'll need the Hellwig item #HE26GR. This is a 1-3/8" diameter front…

view full answer...

Front and Rear SumoSprings for a 2022 Ford E-350 E Series Cutaway

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching