Recommended Locking Tonneau Cover for a 2022 Ford F-250 with a Gooseneck Hitch

Question

Question:

I need a locking tonneau cover for my 2022 F250 sd. I need it to accommodate a gooseneck trailer. recommendations?

asked by: Steven

0

Expert Reply:

The Tonneau cover that I recommend for your 2022 Ford F-250 is the RetraxPRO MX Hard Tonneau Cover # RT80384 (for 8' truck bed). This cover is made in the USA, has a limited lifetime warranty and has a locking handle that allows you to close and lock the cover for maximum security. It has a retractable design that allows for full truck bed access in seconds which will allow you to use your gooseneck trailer.

If you have the 6-3/4' bed then you will want the RetraxPRO MX Hard Tonneau Cover # RT80383 which has all of the same features as above but for the shorter truck bed.

expert reply by: Scott S

0

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

Hey Ken! Instead of worrying about fitment and a potential return I can give you some measurements so you can figure it out before ordering. The standard shank on the B&W Continuum Weight Distribution System #BW28FR is 11-3/8" from the…

view full answer...

Answer 6

Hey Daniel congrats on the new truck! The Lomax Stance Hard Tonneau Cover item #LOM54RV does indeed fit the 2026 Chevrolet Silverado EV with the Mid Gate. It also works with the Multi-Flex Tailgate that comes on the Trail Boss models. For a…

view full answer...

Answer 7

Hi Bruce! The Access Toolbox Edition Soft, Roll-Up Tonneau Cover #A63FR will indeed fit your 2021 GMC Serra 1500 SLT with the short bed and your toolbox. This can be used with toolboxes that measure 19" to 21" long, so you are good to go!…

view full answer...

Answer 8

Hey Rick, thanks for reaching out. The Mad Ramps Golf Cart Risers included with the #MR89RV kit are very straightforward to install. They bolt directly onto the existing ramp surfaces of your Mad Ramps system using the included hardware. Here are the…

view full answer...

Answer 9

Hi Richard! From the top of the shank to the lowest part where the tri-ball sits on the #BWTS20067BMP is 11.125". If you have the balls at max drop with the tallest one hanging down that would be 12.5". We recommend at least 11" of…

view full answer...

Answer 10

Hey Kevin, thanks for reaching out. Congrats on the new F150 and the Escape 5th wheel! I love that camper too its just the right size. You’re on the right track. Since the F150 doesn’t offer the third brake light camera like the Super Duty trucks,…

view full answer...

Answer 11

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 12

Hey there Trace! There are parts of the steel brackets that come into contact with the aluminum bed on your new 2026 F350 Super Duty (congrats on the new truck by the way - those are super nice!). B&W says to use strips of polypropylene tape…

view full answer...

Recommended Locking Tonneau Cover for a 2022 Ford F-250 with a Gooseneck Hitch

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching