To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
You can install this retractable, hard tonneau cover on your vehicle in about 10 minutes, and you can completely remove it just as quickly for full bed access. Aluminum and vinyl deck has strength of a hard cover and seamless look of a soft cover.
Specs:
Features:
The Switchblade retractable hard tonneau cover provides you with security and weather protection for your truck bed, easy accessibility to your cargo, and the flexibility to haul large items that require full bed capacity whenever needed. You can install the cover without assistance in approximately 10 minutes, and you can completely remove it from your vehicle's bed just as quickly. The tonneau deck is constructed of a vinyl fabric top sheet that is bonded to rigid aluminum panels, combining the seamless appearance of a soft cover with the security features of a hard cover.
Simple, 1-Person Installation
To install the cover, set the canister on the bulkhead of your truck. Make sure that it's square with your bed. Bolt the side rails to the tabs on the canister.
Secure the rails to your truck bed side rails using 2 clamps per side. Slide the clamp onto the rail, flip the pivot arm up so it is under the bed rail lip, and tighten the clamp in place with the twist knob. Shims are included for trucks with tapered beds.
Each clamp at the tailgate end of the rails has a supplemental kickstand to help level the rails and prevent overtightening during installation. To install the kickstand, simply slide it into the grip handle at the bottom of the clamp. Rotate the kickstand so the foot rests squarely against the side wall of the truck bed, and tighten in place.
Mount the top cover plate to the canister with the included hardware. Attach the drain tubes to the canister and route each tube out of the OEM drain holes in the floor of your bed.
To hold the pull strap off the floor of your truck bed, apply the adhesive hook-and-loop fastener strip onto the underside of a rail at your desired location.
Remove or Reinstall in 10 Minutes
After the initial installation, the tonneau cover can be completely removed or reinstalled in approximately 10 minutes. The Switchblade is great for whenever you need to haul large items that require full bed capacity from front to back and side to side. After your large haul is complete, you can easily reinstall the cover to protect your truck bed again.
To utilize your entire truck bed, detach the canister from the side rails by removing the bolts on either side with a wrench. Then take the side rails off your truck by removing the clamps with the same wrench. Wrap the pull-strap around the canister and use it to lift the canister off your vehicle.
Retractable Cover with Built-In Pull Strap
To retract the Switchblade, simply squeeze the pinch grips located underneath the cover near the center of the tailgate to activate a heavy-duty tension spring. The spring automatically retracts the cover into the canister at the bulkhead of your truck bed. This provides quicker, easier access to your truck bed when compared with manual retractable covers that have no spring-loaded assist.
A built-in pull strap helps you extend the cover over your bed. As you pull, the tonneau will glide smoothly along tracks in the side rails until it reaches the tailgate and secures in place. You can also use the rear plate of the tonneau cover to pull it closed.
Compact, Angled Canister
The cover retracts into a canister located at the front of your truck bed, giving you unrestricted visibility out of your rear window. The canister also protects the stored cover from the elements. And the compact, angled design allows for maximum clearance for your tools and cargo.
Water Management System
The Switchblade rails feature a water management system that channels excess water into the canister. This prevents water from getting into your bed or freezing in your tonneau cover rails during cold temperatures. Drain tubes attached to the bottom of the canister remove water through the OE drain holes in the floor of your truck bed.
Flush-Mount Design
The black powder-coated side rails sit 1/8" above your truck bed rails for a flush appearance. This low-profile design is aerodynamic to reduce wind drag, and it helps to improve gas mileage when the cover is closed.
Stylish and Heavy-Duty Construction
The Switchblade deck is constructed of a vinyl top layer bonded to heavy-duty aluminum slats. This ArmorTek deck looks like a soft tonneau cover with no visible seams, but has the strength and security of a hard tonneau cover. A large seal at the rear of the bed closes the gap between the cover and tailgate to create a barrier to prevent water from entering the truck bed.
Security
The Switchblade provides excellent protection for your cargo when used in conjunction with a closed and locked tailgate. Both the pinch grips and pull strap are located underneath the rear plate, which makes them inaccessible when your truck bed is closed. The heavy-gauge aluminum panels are better at preventing theft when compared with soft covers that can be cut or punctured with a knife. The panels are also more effective at preventing theft than tri-fold hard tonneau covers because the panels cannot be pried open at any point along the rails.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Ratings & Reviews
The products instructions sucked & it was missing 1 part. It took much longer than 10 minutes to install as indicated. Plus I was expecting to see a video of installation on your website, but there wasn't any.
Tonneau cover was delivered as requested and the product was installed in less than 1/2 hour. Prompt delivery with zero problems,I would highly recommend this product.
I know that it is not your problem but the installation instructions need to be better I learned more from a video on the cover than what the instructions told me .Maybe Pace Edwards should include a link on their instruction page
Finally got time to install my bed cover. Love it, much better than the old back flip that I had on my old truck.
My third Switchblade retractable hard cover . Happy with the look , function , and ability to secure items within the truck bed .
Abigail helped me find the correct tonneau cover that fits an 8 ft. Truck bed. Order came pretty quickly and my wife and I installed it in about 1 1/2 hours. The materials seem to be top notch and look amazing on my truck. Love the low profile.The cover slides back and forth with ease. Great fit! Great Product. Do watch the video's on the installation. Very helpful.
The cover looks great and was easy to install.
I had to remove the spacers at the tale gate ends for clearance.
Opening and closing is smooth after using the supplied rail lubricant.
I love it, easy to install, and so good looking!
It keeps items in the bedroom covered but NOT DRY . It is NOT worth the $1200 . Seriously thinking about going back to my tri fold cover
The installation took us 2 hours. The bracket instructions were not as clear as i woul.like. the truck bed hole for tge drains was 1/2" the hose was 3/4 inch. Delivery and tracking were perfect
Extremely easy to install. Although it says 1 person installation, having two makes it just quicker. Box arrived open (main cardboard flap) but all items were accounted for. Just recommend banding straps prior to shipping. Feels very sturdy and well secured to the bed with no holes. Drain plugs fit as OEM and were simple to install as part of the process. Hoping this cover stands the test of time. Highly recommend! etrailer.com was quick to ship and purchasing process was very smooth!
It is installed and was fairly straight forward. Despite others indicating there were no instructions, mine included somewhat clear instructions (could be better). If I had understood that staples through vinyl into aluminum was the core of the design - or a plastic bin was the container, I would certainly have kept looking for something with a more robust design. I expect a couple/three years before replacing, but it solves my immediate need. In this case, ability to see the gooseneck ball from the center high-mount camera that was blocked with the tri-fold cover. Like others have shared, don't expect a dry bed! The omission of a seal from the rear of the rails to the tailgate is confusing - as is the lack of seal length on the head rail to from a seal up front. I'll figure something out for both eventually, but a little underwhelming for the would-be low cost to address in design.
I have just received my Pace Edwards Switchblade Retractable Hard Tonneau Cover. It was super easy to install. You guys at etrailer are awesome. Super fast delivery. This is where I’ll shop from now on.
Overall for the price I’m not satisfied. I followed the manufacturers instructions and it worked smoothly for about a month and then the tracks started getting rougher and rougher. It will open about half way and then you need to get in and push it from side to side for it to fully retract. I also had the cover fall down off the track in the center and it was a huge pain to get it back in the track by myself with cargo inside the bed. You are better off spending an extra $100-200 and going with the “real truck” roll up bed cover.
Great service and fine product! Order was delivered in two packages and delivered on time, and all the parts were included (nothing left out as sometimes happens). Tonneau cover was easy to install both by following included directions or by using the demo video on the website. Item fit my 2026 RAM3500 DRW MEGA CAB like OEM and worked properly upon installation.
I have only one slight concern as you will see in provided pictures. To make the cover fully "water tight", you will need to add some type of seal or trim where the bed meets the bed rails, as the provided seal does not extend over this small, open area at the joint.
Looks good. Easy install. Can be done by one person. Opens and closes smoothly.
Excellent product very easy to install fits my F350 perfectly
E Trailer has great customer service I would recommend this product to anyone who is looking for a retractable tonneau cover
Thank you eTrailer for your install videos. They are so much better to follow than the instructions that come with the cover. It took me about an hour to install if not a bit longer due to the rain. I installed on my own, which the install woukd be faster if you have someone helping you. The only thing I had an issue with was the weather strip but it was also due to the surface being wet and hard to dry.
The bed cover is amazing! I have a low bed rack that doesn’t work with a folding cover, so this retractable cover was the perfect choice. Now I can leave the rack in place and access the bed. Installation was pretty easy, a little confusing just from the directions, but it probably would have been easier if I watched a video. The clamps weren’t intuitive, but made sense once they were in and feel super secure. I’ve only had it in for a few days, but just took the truck camping for a long weekend and used the cover a bunch. I can’t speak to the longevity yet, but so far, so good!
I'm very satisfied with the product. I previously had a flip top style tonneau cover on an older truck which blocked my rearview mirror when fully up. Not a problem with this unit. The majority of the full length bed is still usable. The unit only hangs down about 8 to 10 inches or so into the bed. I had no problem installing it on my own. The fit was perfect. Overall a good experience. The only thing I would have liked to have seen was a third brace in the middle for the side panels, just to provide extra support in case someone sits down on the bed rail and puts more wait on the side panel than the bed. That said, it does feel pretty solid and looks great.
Love the sleekness of the cover. I removed a bak revolver and replaced it with this one. Much easier to hook up the 5th wheel without the giant roll of cover behind the cab. Super easy to open and close. The only issue I had was the front mounting hardware did not fit for some reason. They would not loop together due to the Engel of the truck bed. Not a big deal as I made it work just fine.pretty easy install as I did the entire thing alone as a 58 year old man with a wrecked back!
Install was easy and the cover works and looks great
I'm really happy with this purchase. This is the easiest to use cover to use I have ever had. It fits my F-450 perfectly, and looks great.
Very easy one man install. Looks amazing. very flush with bed rails. will slide over 5th Wheel hitch. gives enough room under Canister to put 36 gallon fuel tank.
James D.
5/27/2026
Thanks for the response Jody, Smooth install, clean look and pairs up perfect with your 5th wheel setup. That's a win and we appreciate you choosing etrailer!
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike L.
9/10/2025
We're glad to hear that, enjoy your new tonneau cover!