Curt C11525 Hitch for 2022 Honda Accord

Question

Question:

Will the Curt C11525 fit my 2022 Honda Accord. It is not a Hybrid.

asked by: Nikki

0

Expert Reply:

The Curt # C11525 is a confirmed fit for your 2022 Honda Accord as long as it is not a hybrid model. It has 2000 lbs towing/200 lb tongue weight capacities.

I have attached an installation video and installation instructions for you to check out.

expert reply by: Mike L

0

Installed Apperance of Draw-Tite 24972 and Curt C11525 on 10th Gen Honda Accord
(click to enlarge)

Elliott

6/9/2026

Is there a solution for the 2022 Hybrid model ?

Answer 1

To add a hitch to your 2019 Honda Accord Touring hybrid, you will need the Draw-Tite Trailer Hitch item #24972 you were looking at. This hitch is custom fit and bolts to your Honda with included hardware. This is a class I hitch with a 1-1/4"…

view full answer...

Answer 2

Your 2018 Honda Accord has a max towing capacity of 1,000 lbs as you stated, so it is not able to flat tow your VW Beetle weighing 1,800 lbs. The engine and transmission are the biggest deciding factors in towing capacity but the frame, suspension,…

view full answer...

Answer 3

13 inch trailer wheel/tires like the size 185/80-13 like part #AM1ST79 are rated for up to 81 MPH. Most trailer tires are only rated for 65, so if 65 is the limit you have then you'd be good.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Curt C11525 Hitch for 2022 Honda Accord

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching