Correct 1/2 Lug Nuts for Trailer Wheels

Question

Question:

I have a oper landscape trailer i need 1/2 inch lug nut and lug combo packes if you have them

asked by: Charles L

0

Expert Reply:

We have many different kinds of 1/2" lug nuts; part # CE11051 for the open style, part # LHLR103 for acorn short, or part # AM90049 for acorn long. The open style are for steel wheels and the acorn style are for aluminum wheels. The longer ones are needed for aluminum wheels with deep recesses around the lugs. We also offer lug nut locks as well, the Wheel Lock Set for 1/2" Wheel Bolts part # RG01-150.

expert reply by: Conner L

0

Answer 1

For lug nuts to use with the Kenda Karrier ST205/75R14 Radial Tire w/ 14 Series T09 Aluminum Wheel #AM34659 we have the #LHLR103 for standard lug nuts and then for a locking set we have the #RG01-150.

view full answer...

Answer 2

The Aluminum Hi-Spec Series S5 Trailer Wheel - 13" x 5" Rim - 5 on 4-1/2 - Silver #AM22323HWT will work well on your 2008 Flagstaff MAC 228D. You will not need to remove the current lug studs and trade them out. The current ones will work…

view full answer...

Answer 3

Hey James, so while we don't have a picture of the #KE33JR exactly yet I attached a picture that shows what the wheel looks like in a different size to give you an idea as its most likely you wanted to just see the wheel design.

view full answer...

Answer 4

The Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel #AM30120 are lugcentric wheels with a 2.5" hub bore hole. You will want to continue using the acorn style lug nuts with these wheels to help keep them snug since your 56mm hub bore is…

view full answer...

Answer 5

Lug nuts are not included with our trailer wheel and tire combos like the Karrier ST175/80R13 Radial Trailer Tire with 13" Aluminum Wheel #AM32001HWTB that you referenced as not everyone needs them, so it allows us the ability to not have to…

view full answer...

Answer 6

Hey Jeremy, For stainless steel lug nuts I'd go with Lionshead's 1/2" -20 #LHLR103 or 9/16"-18 #LHLR110 depending on the diameter of your wheel studs. You could add in a hub cover but it's honestly not necessary and more so just…

view full answer...

Answer 7

For you I highly recommend the DeeMaxx Trailer Wheel Lug Nut #DE93GR. These use the same 1/2" - 20 with a 60 degree cone. They are solid one-piece design, which will more durable and rust resistant than the two-piece options.

view full answer...

Answer 8

Part #RG01-150 is a 1/2 inch locking lug nut designed for 1/2 inch wheel studs. 1/2 inch wheel studs are the lug nuts you need and Lionshead #LHLR103 is a good option for your trailer. The wheel lock kit comes with a special tool you will use to…

view full answer...

Answer 9

For a set of lug nuts for a 1/2-20 wheel stud used with the Lionshead wheel and tire part #LH36FR you would want to use the part #LHLR103. These are stainless steel and the correct cone angle, 60 degrees. Your stud length is a standard length and…

view full answer...

Answer 10

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 11

The Westlake ST225/75R15 #LH36FR will definitely be a good replacement for your current tire and wheel set up. The 6 on 5 1/2 bolt pattern is the industry standard for 6 lug wheels on trailers, so that will not be a problem at all. With aluminum…

view full answer...

Answer 12

Hello Tom, thanks for reaching out. The Lionshead Trailer Wheel Lug Nut #LHLR103 are stainless and they do have a shiny polished finish. Not as shiny as chrome, but I think the pictures we have on our site don't quite to them justice. Maybe the…

view full answer...

Correct 1/2 Lug Nuts for Trailer Wheels

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching