Replacement Bearings and Grease Seal for 2007 EZ Loader Tandem Axle Boat Trailer
Updated 01/11/2022 | Published 01/10/2022
Products Featured in This Question
Question:
Can you tell me the bearing and seal size for a 2007 ez loader twin axle trailler
asked by: Mike
Expert Reply:
In order to find the correct replacement bearings and grease seal for your 2007 EZ Loader trailer you will have to take a look at your current bearings. Once you remove your bearings and grease seal, you will be looking for the part number on the side.
If the part numbers have worn off or can't be found, you will need to take some measurements using a digital caliper like the # PTW80157. You will be measuring the spindle where the bearings and grease seal sit. This will be the inner diameter which will allow you to find the correct bearings.
I have attached a diagram showing where part numbers are typically located and where to measure for your reference. I also included a link to all of our bearings and seals which you can filter by inner diameter.
(click to enlarge)
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer hubs and drums
- Q&A: Parts Needed To Convert Oil Bath Hubs On EZ Loader Boat Trailer To Grease
- Search Results: cotter pin
- Search Results: trailer bearings races seals caps
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet/KodaGuard - 3,500 lbs - Oil
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Search Results: oil bath seal
- Shop: Kodiak Synthetic Bearing Oil for Oil Bath Hubs - 8 oz Bottle
- Search Results: cotter pins
- Search Results: kodiak trailer bearings races seals caps
- Search Results: spindle 1750
- Shop: Replacement Seal for Kodiak XL ProLube Kit for 5,200-lb to 8,000-lb Axles
- Shop: Replacement Seal for Kodiak XL ProLube Kit for 3500-lb Axles
- Q&A: Replacing Broken Oil Seal Springs 168255TC
- Shop: Double Lip Seal for 3,700-lb Marine Hubs
- Video: Breaking Down the Kodiak Disc Brake Kit-K2R35DKG
- Video: Feature Breakdown: Cotter Pin
- Video: Feature Review Kodiak Synthetic Bearing Oil for Oil Bath Hubs
- Video: All You Need to Know About the Kodiak Disc Brakes
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and KodaGuard - 3,500 lbs
- Q&A: Bleeding Trailer Brakes After Installing Kodiak 225 Disc Brake Calipers
- Video: Bleeding Brakes Demonstration
- Q&A: Do 10 Inch Kodiak Stainless Steel Disc Brakes Work With Oil Bath Hubs
- Q&A: Replacement Grease Seal for a 168255TC Rubber Coated Seal
- Q&A: Replacement 250-031468 Seals Needed for Reliable Oil Bath
- Q&A: Replacement Grease Seal For Kodiak Disc Brakes To Fit Spindle With 1.68"