Best Brake Controller for a 2022 Jeep Gladiator with Tow Package

Question

Question:

I need a brake controller for my 2022 Jeep Gladiator with tow package, what do you have?

asked by: Leonard

0

Expert Reply:

The brake controller that I recommend for your 2022 Jeep Gladiator with tow package is the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 which will use the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers # 3073-P to plug into your Gladiator. The # 3073-P will plug into the # 90195 and then the other end will plug into the port under your dash, providing for a plug-n-play installation. This will give you proportional braking for your trailer with one of the most reliable brake controllers available. This controller will work for up to 4 axles and is designed for use with electric or electric-over-hydraulic trailer brakes.

With a proportional brake controller, you can get heavy-duty emergency braking, general braking or slow-to-an-idle braking for your trailer automatically. The intensity with which your trailer brakes are activated and the rate at which they are applied are dependent on the deceleration of your tow vehicle. This means that proportional controllers are able to adapt to every braking situation differently. So, if you slam on the brakes in your truck, your trailer brakes will activate with that same extreme intensity. And if you merely slow down as you approach a red light, your trailer will gradually brake in the same manner.

expert reply by: Scott S

0

Answer 1

Suspension enhancement systems can be used with a weight distribution system without any problem, in fact, a weight distribution system is going to be more effective at leveling out your load than the helper springs in the sense that it will…

view full answer...

Answer 2

Although both controllers are excellent quality proportional brake controllers, there are a couple of differences. • The Prodigy P2 #90885 is compatible with electric over hydraulic trailer braking system, while the BRAKE-EVN is only compatible with…

view full answer...

Answer 3

Yes, you can fit the Furrion Vision S Wireless RV Observation Camera System, #FCE48TASL-05 to your 2022 inTech Sol Horizon Rover. While some RV OEM's have begun releasing their RV's from the factory with pre-wired mounts for back up cameras I…

view full answer...

Answer 4

It is possible to pull a 5th wheel with a Chevy Colorado. There are going to be a few limiting factors though, this vehicle really is not designed for 5th wheel or gooseneck towing. I recommend using a Universal install kit like the Reese #RP30035,…

view full answer...

Answer 5

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 6

Your 1999 GMC Suburban does not have a port under the dash to connect a brake controller harness. You will need to hardwire the Hopkins Agility Brake Controller #HM47294 with brake controller 7 and 4-way installation kit, item #ETBC7, or a 6 and…

view full answer...

Answer 7

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Best Brake Controller for a 2022 Jeep Gladiator with Tow Package

Featured Help Information

Miscellaneous Media

Continue Researching