Front Mount Trailer Hitch For A 2022 Ram 2500

Question

Question:

I'm looking for a front mount trailer hitch for my 20222 Ram 2500, what do you suggest?

asked by: Ben

0

Expert Reply:

We have a great solution for your 2022 Ram 2500. The Curt Front Mount Trailer Hitch Receiver # C73ZV is a great option that is a direct fit for your Ram 2500. This hitch is engineered, fabricated. welded, and tested in the USA; and is rated for a line pull load limit of 9,000lbs, as well as, a vertical load limit of up to 500lbs.

expert reply by: Bryce D

0

Answer 1

The Draw Tite part #DT36MR sticks out further than the Curt #C73ZV that fits your 2022 Ram 2500.

view full answer...

Answer 2

Hello Laurel. I have a great option for the 2022 Ram 2500. For a front hitch you want the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #C73ZV. This front hitch can handle a vertical load of 500 pounds, has a line pull of 9,000…

view full answer...

Answer 3

We do have a front hitch available for your 2024 Ram 2500. That is the Curt Front Mount Trailer Hitch Receiver #C73ZV. This hitch features a 9,000 lb line pull and vertical load of 500 lbs. It also has a bolt-on installation. However, trimming of the…

view full answer...

Answer 4

Yes, I can! To add a front mount hitch to your 2024 Ram 2500, I recommend the EcoHitch item #EH37FR. This front mounted hitch is custom fit and bolts to your Ram with included hardware. A great feature about this hitch is that it fits both the gas…

view full answer...

Answer 5

We can definitely help set you up! There is a front mount hitch available for the 2024 Ram 2500 with the Curt #C73ZV. It will be a direct bolt-on install and some minor trimming of the bumper fascia may be required. As far as front suspension…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Front Mount Trailer Hitch For A 2022 Ram 2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching