Dimensions of Global Link 295-000077 Replacement Cam Lock Cylinder

Question

Question:

I need 2 locks this one 1 3/4 and 2 1/8 - can you tell me the dimensions of these locks and if you have the 2 1/8 length

asked by: Tom S

0

Expert Reply:

The GlobalLink # 295-000077 replacement cam lock cylinder is the longest replacement lock cylinder we offer. The # 295-000077 measures 1-3/4 inches long, measured from the back of the bezel to the end of the cylinder. The cylinder is 3/4 of an inch in diameter, as shown in the photo I provided.

expert reply by: Mike L

0

Dimensions of Global Link 295-000077 Replacement Cam Lock Cylinder
(click to enlarge)

Answer 1

Replacement Cam Lock Cylinder for RVs, #295-000077 is a 1-3/4" long by 3/4" diameter measured at the threads. The 1-3/4 inch length of the Replacement Cam Lock Cylinder #295-000077 refers to the threaded length of the cylinder. Other…

view full answer...

Answer 2

Hello Dave, I took a stroll out the the warehouse and both of the blades for the Compartment Door Key Lock - 1-3/8" - Standard #372335 measure 1 13/16". Will that work for your application? How long are the ones you are trying to replace?

view full answer...

Answer 3

Hello Harry, thanks for reaching out. We should have a cam lock that will work for you, but there is no way to look up your travel trailer to know exactly what size lock you have. Trailer manufacturers just do not make this kind of info available…

view full answer...

Answer 4

We do have an option for 1-3/8" Long cam locks that can be keyed alike but the compartment door key lock part #372335 cannot be keyed alike. I recommend the Replacement Cam Lock Cylinder for RVs - Keyed Alike Option - Stainless Steel -…

view full answer...

Answer 5

The lock cylinder of the Deluxe Compartment Door Key Lock #37200185 is 1-3/8" in length, with an overall total length of 1-5/8". The cam latch only has a 1-3/4" overall length. I looked through our other options and wasn't able to…

view full answer...

Answer 6

The Replacement Cam Lock Cylinders for RVs like part #295-000077 all have a 3/4" diameter measured at the threads.

view full answer...

Answer 7

The 1-3/4 inch length of the Replacement Cam Lock Cylinder #295-000077 refers to the overall length of the cylinder. We also have 7/8 inch part #295-000003. 1-1/8 inch #295-000004 1-3/8 inch #295-000005

view full answer...

Answer 8

Hey John, the Deluxe Thumb Latch part #37200145 that you referenced does not come with the plate or bracket that it secures to. You would need to reuse what you have currently.

view full answer...

Answer 9

I reached out to the manufacturer he Deluxe Compartment Door Thumb Latch - 1-3/8" part #37200145 is designed to work with 3/4" holes the locking blades are 1 1/2" long and can be set to depths of 1 1/4", 1 3/8" and 1…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Dimensions of Global Link 295-000077 Replacement Cam Lock Cylinder

Product Page this Question was Asked From

Continue Researching