1-3/8" Long Cam Locks That Can Be Keyed Alike

Question

Question:

Need 5 1 3/8 cam locks with same key

asked by: John

0

Expert Reply:

We do have an option for 1-3/8" Long cam locks that can be keyed alike but the compartment door key lock part # 372335 cannot be keyed alike.

I recommend the Replacement Cam Lock Cylinder for RVs - Keyed Alike Option - Stainless Steel - 1-3/8" Long part # 295-000005. Simply mark the keyed alike option on the drop down above the "add to cart" button and change the quantity to 5 before purchase.

expert reply by: Heather A

0

Answer 1

Hello Dave, I took a stroll out the the warehouse and both of the blades for the Compartment Door Key Lock - 1-3/8" - Standard #372335 measure 1 13/16". Will that work for your application? How long are the ones you are trying to replace?

view full answer...

Answer 2

The lock cylinder of the Deluxe Compartment Door Key Lock #37200185 is 1-3/8" in length, with an overall total length of 1-5/8". The cam latch only has a 1-3/4" overall length. I looked through our other options and wasn't able to…

view full answer...

Answer 3

Replacement Cam Lock Cylinder for RVs, #295-000077 is a 1-3/4" long by 3/4" diameter measured at the threads. The 1-3/4 inch length of the Replacement Cam Lock Cylinder #295-000077 refers to the threaded length of the cylinder. Other…

view full answer...

Answer 4

The GlobalLink #295-000077 replacement cam lock cylinder is the longest replacement lock cylinder we offer. The #295-000077 measures 1-3/4 inches long, measured from the back of the bezel to the end of the cylinder. The cylinder is 3/4 of an inch in…

view full answer...

Answer 5

Hello Harry, thanks for reaching out. We should have a cam lock that will work for you, but there is no way to look up your travel trailer to know exactly what size lock you have. Trailer manufacturers just do not make this kind of info available…

view full answer...

Answer 6

What I think you are asking for is a combination of replacement locks for entry door and maybe storage compartments, all keyed the same. Please let me know if I am incorrect that I may provide a different recommendation for you. Or, if my suggestion…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 12

The Dexter Nev-R-Adjust electric trailer brakes can be manually adjusted. There are a couple teeth of the adjustment wheel that are exposed just under the lever that you referenced. I have attached a photo showing the teeth. You will likely need a…

view full answer...

1-3/8" Long Cam Locks That Can Be Keyed Alike

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching