Front Runner Footwell Water Tank - 10.6 Gallons

Video Transcript for Review of Front Runner Jeep Storage - Footwell Water Tank 10.6 Gallon - FR79JJ

Hi everybody. Andy here with etrailer.com. Let's take a real quick look at this Front Runner footwell water tank. This 10.6 gallon water tank is going to let you transport and dispense drinking water on your overland adventure. And this is shaped to fit in the footwells behind your front seats. This is designed to fit most vehicles, but you wanna make sure that you check the dimensions of the footwells in your vehicle.

As you can see there on your screen, I'm pointing out that this is not going to fit the Toyota FJ Cruiser, the Lexus GX 470, the Suzuki Jimny, or the Jeep Wranglers. Just so you're aware of that. Let's go over some measurements. So taking a look at just the overall width, let me see if I can get my tape measure here to cooperate. So lining that up there.

Overall length, we are sitting pretty close to 47-3/16 inches long. And then looking at the width, let me get my ruler for that. It might be a little bit easier to show you. So looking at the overall width, we're sitting right about 9-13/16 inches wide. And then the overall height, right about 7-1/8 inches tall.

Now the cutout might be a little bit tricky to show you here, but I would like to kind of give you the measurements of that as well just so you have a good idea. So the cutout is going to range from about 11-13/16 inches long at the widest point, and then at the narrowest point, right at about 8-5/16 inches or so. And then the width is gonna be right at about 9-13/16 inches. And then the height of that cutout about 4-5/16 inches tall. So hopefully that helps you out, helping you to determine if this is going to fit your particular vehicle.

This is made of durable polyethylene, so this is gonna be very tough. It's gonna be long-lasting. It is food safe, it is BPA-free plastic. And then I do wanna give you a closeup here and show you that we do have two 1/2 inch plastic barb fittings, got one right there on one side, and then another one on the opposite side. So you're gonna be able to fit hoses onto those. Those hoses are sold separately. Overall, this weighs about 11 pounds and we have our fill cap here as well. And it is tethered as you can see. Well, I think that's gonna wrap up our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.