Fender Backing Plates For etrailer Tandem Axle Teardrop Trailer Fenders # HP64VR

Question

Question:

Hello, I am interested in purchasing part #HP64VR tandem axle fender set for 15-16 inch wheels. Can you tell me if you have backing plates that work with these fenders? I was a bit confused when trying to search myself. I have 225/75/16 tires on 16 wheels. Thank you very much for your time. I look forward to your response.

asked by: Jason B

0

Expert Reply:

The Backing Plate # HP72FR can be cut to match the Tandem Axle Teardrop Trailer Fenders # HP64VR. The fender is made of 16 gauge steel and the backing plate is 18 gauge steel if you plan to weld them together.

expert reply by: Bud M

0

Answer 1

When replacing your fenders you want to do your best to match the dimensions to what you currently have. Typically you won't find an exact match to the current fenders. Based on my research it looks like you have a tandem axle trailer with…

view full answer...

Answer 2

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 3

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 4

Thanks for the pics Kemo, they really helped! The CE Smith Single Axle Trailer Fenders #CE19504-2 are larger than what you currently have and use a different mounting style. Based on your setup, the CE Smith Fenders wouldn’t bolt onto your existing…

view full answer...

Answer 5

Hey Nate, We do not have a 3/4" spindle nut or washer, the smallest option is the 7/8" spindle nut #165931and a 1" washer #SW1000. I cannot find anything smaller. Are you sure the threads on you're spindle are 3/4"? If they…

view full answer...

Answer 6

Hey Adam! Yes, the Trailer Hub and Drum Assembly #TRU66AV will work as a replacement on your axle. This fits the standard #84 spindle found on 3,500 lb axles and has a 5 on 4-1/2 bolt pattern. Then for replacement brakes you can use the etrailer…

view full answer...

Answer 7

Hey Michael, congrats on the new SUV. The EcoHitch item #EH87CR does not require you to remove the rear bumper assembly when installing. It does require some slight fascia trimming though. You'll have to remove a 2-3/4” deep and 4-1/2” wide…

view full answer...

Answer 8

I checked out your 2007 Exiss Sport 22 trailer and it has a tandem style fender like the part #HP64VR which is for 15 to 16 inch wheels and is overall 68 inches or part #HP94VR which fits 14 to 15 inch wheels which is 65 inches long.

view full answer...

Answer 9

The length of a fender is measured from the longest point, at the very bottom of each end across. Then the height is measured from the tallest point, right in the center. For example, the CE Smith Single Axle Trailer Fender #CE17720 is 22-1/2"…

view full answer...

Fender Backing Plates For etrailer Tandem Axle Teardrop Trailer Fenders # HP64VR

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching