Snap Pad Fit for Lippert 6 Jack Ground Control 3.0

Question

Question:

I have a 2021 Montana 5th wheel with the lippert 6 jack system Which would you recommend to me snap pads

asked by: Brad

0

Expert Reply:

We have the same # SP54FR4 SnapPad XTRA jack pads in a set of 6 as part # SP54FR6.

If you click the provided link, you can see how the snap pads work.

expert reply by: Mike L

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hey Paul! The PullRite SuperGlide #PUL43RR (2714) and #PUL73RR (2914) do weigh the same. The main difference is the capacity, which is going to come from the base of the 5th wheel hitch. Since your 2027 Keystone Cougar 316RLS has a GVWR of 12,900 lbs…

view full answer...

Answer 7

Hey Eric! For air bags I recommend going with Firestone. They make the most durable and reliable air bags for your 2024 F-250. If you don't mind using your phone to control the air compressor you can use the Firestone Ride-Rite Air Bags w/ Easy…

view full answer...

Answer 8

Hey Tony, the The Grand Design Lineage Series E 30DC motorhome comes equipped with a Titan Aluminum 4-Point Hydraulic Leveling System so the correct Snappads would be the part #SP54FR4 which is for 9 inch round jack feet like your Titan has. How do…

view full answer...

Answer 9

Hey Sean, welcome back! We do have a video showing the B&W Turnoverball #BWGNRK1320 being installed on a 2022 Ram 3500. I have provided a link to the video below. We don't have any videos showing how to remove the factory puck system though,…

view full answer...

Answer 10

Hello Luc, thanks for reaching out. The SnapPad #SN44VR kit will not fit the HappiJac jacks used on a Lance 1172 truck camper. The #SN44VR is designed for Lippert PSX style trailer stabilizer jacks with 5-1/2 inch square feet, not the round corner…

view full answer...

Answer 11

Hello Jill, Great question! Yes, the SnapPad XTRA Jack Pads for Lippert leveling systems with 9" round jack feet #SP54FR4 are permanent snap-on pads. Once they’re installed, they stay on the jack feet, so you won’t need to crawl around placing…

view full answer...

Answer 12

Hey Mike, our part number #AMP77FR is the same as the Amplock part number #LPC-VR so this is the lock you are looking for and is a really great option. While we don't carry the Proven PL5 I checked it out and while it's a very similar design…

view full answer...

Snap Pad Fit for Lippert 6 Jack Ground Control 3.0

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching