How to Find Correct Replacement Bearings for Dexter Trailer Axle
Updated 11/23/2021 | Published 11/21/2021
Products Featured in This Question
Question:
I have Dexter D60 SLR0, Dex#7632918, and S/N 133155556 axles with 7/2/18 build date. What bearing kit would I need?, Thanks
asked by: Michael B
Expert Reply:
I reached out to Dexter and even with your axle tag they do not have any information on your axle since the it was ordered as a beam. In order to find if the Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal # BK3-100 is the correct replacement, you will need to remove your hubs and either find the part numbers on your existing bearings and seal or take some measurements.
The part numbers should be stamped in the side of the bearings. It is, however, possible that they have worn off. If that is the case, you will need to take some measurements using a digital caliper like the # PTW80157. You can either measure the inner diameter of your bearings and seal or measure the spindle where they ride.
If you send me these measurements, I would be happy to help you find the correct bearings. I have attached a helpful diagram showing where the part numbers are typically located and where to measure for your reference. I also included a link to all of our bearings and seals that can be filtered by diameter or part number that you can check out.
(click to enlarge)
Product Page this Question was Asked From
Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 15123 and 25580
- Race 25520 and 15245
- 6000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: bk3~100
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Shop: Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Video: Timken Bearing Kit Installation - Enclosed Trailer
- Shop: Peterson Mini Identification Trailer Light Bar - Incandescent - White Steel Base - Red Lens
- Video: Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal Review
- Search Results: trailer breakaway kit
- Q&A: How to Wire Electric Brakes on a Tandem Axle Trailer
- Q&A: Replacement For A SAE-A-P2-72 Trailer Light
- Q&A: Wire Colors for 7-Way Trailer Connector on a 2007 Ford F-250/F-350
- Video: A Closer Look at the 7-Piece Installation Set for Bearings, Races, and Seals
- Video: Replacement Magnet Kit for 12" Electric Trailer Brake Assemblies: The Breakdown
- Q&A: Is 14 Gauge Wire Too Small for Electric Trailer Brakes
- Shop: 7-Piece Installation Set for Bearings, Races, and Seals
- Shop: Replacement Magnet Kit for 12" Electric Trailer Brake Assemblies - 5,200 lbs to 7,000 lbs
- Video: Hands-On with the etrailer Electric Trailer Brakes
- Video: Feature Breakdown: Identification Light Bar for Trucks and Trailers
- Video: In-Depth Review of the 12 Gauge Black Primary Wire
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement Bearing Kit Recommendations for a 1972 Airstream Overlander
- Q&A: Bearing Kit For 6,000 lb Dexter Axles
- Q&A: Do I Have to Use Timken Races with Timken Bearings, or can I Use Mine that were Made in China?
- Article: Holiday 2025 | Staff Picks for Real-Life Adventures
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Maintenance Schedule
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
on Trailer Bearings Races Seals Caps
